Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Gas Plus Head Office

From FireAlarmPedia
System Specifications
FACP: Notifier AFP-200
FACP Location: Main Electrical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: 2004
Year Opened: 1987

Gas Plus is a Canadian chain of gas stations. This page will cover their head office, located at 5910 50 Ave SE, in Calgary, Alberta, Canada. The building was built in 1987, and the fire alarm system was fully upgraded in 2004.

System Specifications (2004-present)

FACP

The building is protected by a Notifier AFP-200 addressable fire alarm system. The panel is located in the main electrical room. The system runs Notifier's CLIP addressable protocol, and the system coding is temporal.

Annunciators

There is a Notifier LCD-80 annunciator at the main entrance.

Notification Appliances

Most notification appliances are System Sensor "SpectrAlert" P2415A horn/strobes (red, wall-mount, 15cd).
Renovated areas of the second floor have System Sensor "SpectrAlert Advance" P2RA horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

Most pull stations are Notifier MPS-950B conventional single-action pull stations, wired to Notifier FMM-101A addressable monitor modules.
Renovated areas of the second floor have Notifier NBG-12LX addressable dual-action pull stations.

Automatic Detection Devices

There are Notifier FSI-851A addressable ionization smoke detectors throughout the building.
Renovated areas of the second floor have Notifier FSP-851A addressable photoelectric smoke detectors; these can also be found in other areas as deficiency replacements.
Mechanical rooms, electrical rooms, and the maintenance/loading bay have Notifier FST-851RA addressable 135°F fixed-temperature/rate-of-rise heat detectors.
All detectors are mounted on Notifier B710LPA bases.

EOLs

There are Notifier EOL-CR end of line resistor plates on all signal circuits.