Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Glenrose Rehabilitation Hospital

From FireAlarmPedia
System Specifications
FACP: Simplex 4100ES
FACP Location: Various
System Type: Two-Stage Networked Addressable
System Line Voltage: 120VAC
NAC Voltage: 70.7VRMS (Audible)
24VDC (Visual)
System Coding: Unknown
Strobes Synchronized: Yes, SmartSync
Date of last known Upgrade: Mid-2010s
Year Opened: 1964

The Glenrose Rehabilitation Hospital is a rehabilitation hospital located at 10230 111 Ave NW, in Edmonton, Alberta, Canada. The hospital was built in 1964, and the fire alarm system was upgraded in the mid-2010s.

System Specifications (2010s-present)

FACP

The building is protected by a Simplex 4120 networked fire alarm system. All nodes are Simplex 4100ES addressable fire alarm panels; three are located in the main entrance vestibule. The system runs Simplex’s IDNet addressable protocol, and is equipped with voice evacuation. The system is configured for two-stage operation; the tones are unknown at this time, and it is assumed live “CODE RED” announcements are made in lieu of pre-recorded messages.

Accessories

There is a Simplex TrueSite workstation in one node in the main entrance vestibule.

Notification Appliances

Most notification appliances are Simplex “TrueAlert” 4906-9153 speaker/strobes (white, wall-mount, set to 70V/15cd).
Some areas have Simplex 4906-9157 speaker/strobes (white, ceiling-mount, set to 70V/15cd).
Some areas have Simplex 2902-9314 remote speakers (white, 8” round), installed in 1997.

Initiating Devices

Pull Stations

All pull stations are Simplex 4099-9004CA addressable two-stage single-action pull stations.

Automatic Detection Devices

There are Simplex “TrueAlarm” 4098-9714 addressable photoelectric smoke detectors throughout most areas.
There are Simplex 4098-9733 addressable 135°F fixed-temperature/rate-of-rise heat detectors in some areas.
All detectors are mounted on Simplex 4098-9792 bases.

Modules

There are Simplex 4090-9001 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Simplex 4090-9002 addressable relay modules serving various purposes.
There are Simplex 4090-9116 addressable isolator modules on all SLCs.

EOLs

There are Simplex 2081-9040C end of line resistor plates on all sprinkler and signal circuits.