Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Gregg Distributors (Edmonton Main)

From FireAlarmPedia
System Specifications
FACP: Edwards EST3
FACP Location: By Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2008
Year Opened: 1991

Gregg Distributors is an industrial equipment supplier. This particular warehouse is located at 16215 118 Ave NW, Edmonton, AB, and is the largest location. The building was originally built in 1991, and was expanded in 2004 and 2008. The fire alarm system was upgraded in 2004.

System Specifications (2004-present)

FACP

The building is protected by an Edwards EST3 addressable fire alarm system. The panel is located past the main entrance. The system runs Edwards’ Signature addressable protocol, and the system coding is temporal.

Booster Panels

There is likely an Edwards BPS6A 6-amp booster power supply on the system.

Notification Appliances

All notification appliances are Edwards “Genesis” G1-HDVM horn/strobes (white, wall-mount, no marking, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices

There are EST SIGA-PS addressable photoelectric smoke detectors in some parts of the building.
Other areas have EST SIGA-HRS addressable 135°F fixed-temperature/rate-of-rise heat detectors.
All detectors are mounted on EST SIGA-SB bases.

Modules

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are EST SIGA-CR addressable relay modules serving various purposes.

EOLs

There are Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.