More actions
| System Specifications |
|---|
| FACP: Mircom FX-2000 FACP Location: Main Entrance Vestibule System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Mircom Date of last known Upgrade: N/A Year Opened: 2015 |
Inglewood 1410 is a condo building located at 1410 9 Ave SE, Calgary, Alberta. It was built in 2015, and the fire alarm system is original.
System Specifications[edit | edit source]
FACP[edit | edit source]
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.
Notification Appliances[edit | edit source]
The common areas of the building have Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to broadband/15cd).
The bedrooms of the suites have Mircom MH-S25WA silenceable mini-horns (white, wall-mount).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations are Mircom MS-401AD addressable single-action pull stations.
Automatic Detection Devices[edit | edit source]
There are Mircom MIX-2251APA addressable photoelectric smoke detectors throughout the building’s common areas, mounted on System Sensor B210LPA bases.
Modules[edit | edit source]
There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system's tamper and flow switches.
There are Mircom MIX-M500RAPA addressable relay modules serving various purposes.
There is a Mircom SDM-240 sync module on the signal circuit.
There are System Sensor M500XA isolator modules on each SLC.
EOLs[edit | edit source]
There are Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.