Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Jasper Station

From FireAlarmPedia
System Specifications
FACP: Notifier NFS-320C
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: 2010s
Year Opened: 1926

Jasper Station is a heritage train station located at 607 Connaught Drive, Jasper, AB. It serves as a station on VIA Rail and Rocky Mountaineer railway lines. It was built in 1926, and the fire alarm system was upgraded in the 2000s.

System Specifications (2000s-present)

FACP

The station is protected by a Notifier NFS-320C addressable fire alarm system. The panel location is unknown. It replaced a Notifier AFP-200C in the 2010s. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.

Annunciators

There is a Notifier LCD2-80 LCD annunciator paired with an ACM-24AT LED annunciator at the entrance.

Notification Appliances

All notification appliances are System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, set to electromechanical, 15cd).

Initiating Devices

Pull Stations

The pull stations are a mix of Notifier MPS-950B conventional pull stations and NFM-950B conventional pull stations; most are NFM-950B. All pull stations are wired to Notifier FMM-101A addressable monitor modules.

Automatic Detection Devices

None noticed.

Modules

There are Notifier FMM-1A addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs

There are Notifier EOL-CR end of line resistor plates on all sprinkler and signal circuits.