More actions
| System Specifications |
|---|
| FACP: Mircom FX-2000 FACP Location: Main Entrance Vestibule System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Mircom Date of last known Upgrade: N/A Year Opened: 2019 |
Keswick Green is an apartment complex owned and operated by Broadstreet Properties. This page will cover Building C, located at 1836 Keene Crescent SW, in Edmonton, Alberta, Canada. The building was built in 2019, and the fire alarm system is original.
System Specifications
FACP
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom's Advanced addressable protocol, and the system coding is temporal.
Booster Panels
There are Mircom BPS-1100 booster power supplies in the 2nd and 6th floor electrical rooms.
The 4th floor electrical room has a Honeywell HPF-PS10B 10-amp booster power supply as a deficiency replacement.
Notification Appliances
All common areas have Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd).
All suite living areas have Mircom FS-400-WW remote strobes (white, wall-mount, set to 15cd).
All suite bedrooms have Mircom MH-S25WA silenceable mini-horns (white).
Initiating Devices
Pull Stations
All pull stations are Mircom MS-401AP addressable single-action pull stations.
Automatic Detection Devices
There are Mircom MIX-2251APA addressable photoelectric smoke detectors throughout all common areas.
There are Mircom MIX-5251RAPA addressable 135°F fixed-temperature/rate-of-rise heat detectors in the mechanical room.
All aforementioned detectors are mounted on System Sensor B210LPA bases.
There is a System Sensor DNRA duct smoke detector housing equipped with a Mircom MIX-2251APA addressable photoelectric head on the main make up air unit.
Modules
There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system's tamper and flow switches.
There are Mircom MIX-M500RAPA addressable relay modules serving various purposes.
There are System Sensor M500XA isolator modules on the SLC.
There are Mircom SDM-240 synchronization modules synchronizing all strobes.
EOLs
There are Mircom MP-300 end of line resistor plates on all sprinkler and Class-B signal circuits.