Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

King Edward Hotel

From FireAlarmPedia
System Specifications
FACP: Simplex 4007ES
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, SmartSync
Date of last known Upgrade: 2019
Most Recent Known Modification: N/A
Year Opened: 1904

King Edward Hotel is a historic hotel located at 137 Banff Ave, Banff, Alberta. The hotel was opened in 1904, and the fire alarm system was fully upgraded in 2019.

System Specifications (2019-present)

FACP

The building is protected by a Simplex 4007ES addressable fire alarm system. The panel location is unknown. The system runs Simplex's IDNet addressable protocol, and the system coding is temporal.

Annunciators

There is a Simplex 4606-9202 annunciator in the main entrance vestibule.

Notification Appliances

All common area notification appliances are Simplex "TrueAlert" 4906-9127 horn/strobes (red, wall-mount, set to 15cd).
Each guest room has a Simplex 4906-9129 horn/strobe (white, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are Simplex 4099-9004 addressable single-action pull stations.

Automatic Detection Devices

There are Simplex "TrueAlarm" 4098-9714 addressable photoelectric smoke detectors throughout the building, mounted on Simplex 4098-9792 bases.

Modules

There are Simplex 4090-9001 addressable monitor modules supervising the sprinkler system's tamper and flow switches.
There are Simplex 4090-9002 addressable relay modules serving various purposes.
There are Simplex 4090-9116 isolator modules on the SLC.

EOLs

There are Simplex 2081-9040C end-of-line resistor plates on all sprinkler and signal circuits.

Former System Specifications (1988-2019)

Former System Specifications
FACP: Edwards Custom 6500
FACP Location: Unknown
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Continuous
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Most Recent Known Modification: 2010s (Smoke Detectors)
Year Installed: 1988
Year Decommissioned: 2019

FACP

The building was protected by an Edwards Custom 6500 conventional fire alarm system. The panel location was unknown. The system coding was continuous.

Annunciator

There was an Edwards 456 annunciator in the main entrance vestibule.

Notification Appliances

All notification appliances but one were Edwards 439D-6AWC vibrating bells (6" gong).
There was one Wheelock MBS-G6-24 motor bell/strobe (6" gong, 1.5cd).

Initiating Devices

Pull Stations

All pull stations were Edwards 275-C111 conventional single-action pull stations.

Automatic Detection Devices

There were System Sensor C2W-BA conventional photoelectric smoke detectors in the hotel corridors.

EOLs

There were Edwards EOL-P1 end-of-line resistor plates on all circuits.