Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Kingston Manor

From FireAlarmPedia
System Specifications
FACP: Mircom FA-1025T
FACP Location: Laundry Room
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: N/A
Date of last known Upgrade: 1980s
Most Recent Known Modification: 2010s, FACP
Year Opened: 1957

Kingston Manor is an apartment building located at 1028 14 Ave SW, in the Beltline neighborhood of Calgary, Alberta, Canada. The building was built in 1957, and the fire alarm system was upgraded in the 1980s.

System Specifications (1980s-present)

FACP

The building is protected by a Mircom FA-1025T conventional fire alarm system. The panel is located in the laundry room. The system coding is temporal.
This panel likely replaced an Edwards 1527.

Notification Appliances

All notification appliances are Edwards 439D-6AWC vibrating bells (6" gong).

Initiating Devices

Pull Stations

All pull stations are Pyrene MS-401 conventional single-action pull stations.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all corridors, and at the top of each stairwell.
There are FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detectors in all mechanical, electrical and laundry rooms.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all circuits.