Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Market Mall Professional Centre

From FireAlarmPedia
System Specifications
FACP: EST QuickStart QS4
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Self-Sync
Date of last known Upgrade: Early 2010s
Year Opened: 1978

The Market Mall Professional Centre is a 4-story medical building located at 4935 40 Ave NW, Calgary, AB. It is adjacent to CF Market Mall. It was built in 1978, and the fire alarm system was upgraded in the early 2010s.

System Specifications (early 2010s-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an EST QuickStart QS4 addressable fire alarm system. The panel is located in an electrical room. The system runs EST's Signature addressable protocol, and the system coding is temporal.

Annunciators[edit | edit source]

There is an EST QSA-2-S cabinet in the main entrance vestibule, with a QS4-CPU-2 CPU and two SL30 LED zone indicators.

Notification Appliances[edit | edit source]

All indoor notification appliances are from EST's "Genesis" line of products. Most notification appliances are EST G1R-HDVM horn/strobes (red, wall-mount, no lettering, set to 15cd). The upper floors have EST G1-HDVM horn/strobes (white, wall-mount, no lettering, set to 15cd) to blend in with the walls.

For outdoor notification, there is an EST "Integrity" CS405-7A-T weatherproof remote strobe (red, 15/75cd) outside the entrance.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable pull stations.

Automatic Detection Devices[edit | edit source]

There are EST SIGA-PS addressable photoelectric smoke detectors in some areas, mounted on EST SIGA-SB bases.

Modules[edit | edit source]

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.