Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Mission Centre

From FireAlarmPedia
System Specifications
FACP: Kidde VS4
FACP Location: Parkade Fire Alarm Room
System Type: Single-Stage Hybrid-Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2021
Year Opened: 1974

Mission Centre is an office tower located at 2303 4 St SW, in Calgary, Alberta, Canada. The building opened in 1974, and the fire alarm system was upgraded in 2021.

System Specifications (2021-present)

FACP

The building is protected by a Kidde VS4 hybrid-addressable fire alarm system. The panel is located in the parkade fire alarm room. The system runs Kidde’s GSA addressable protocol, and the system coding is temporal.

Annunciators

There is a Kidde K-RLCD-C annunciator paired with a Kidde K-RLED24 annunciator behind the security desk. Both annunciators are mounted in a Kidde RA-ENC2 annunciator enclosure.

Notification Appliances

All notification appliances are Edwards “Genesis” G1AVRF horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

Most pull stations are Vigilant GSA-M270 addressable single-action pull stations. Some areas have Mircom MS-401 conventional single-action pull stations, remaining from the previous system.

Automatic Detection Devices

There are Kidde KI-PD addressable photoelectric smoke detectors throughout the building, mounted on Kidde KI-SB bases. The parkade has FDD CF-135 conventional 135°F fixed-temperature heat detectors.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all signal circuits.