More actions
| System Specifications |
|---|
| FACP: Fire-Lite ES-200X FACP Location: Main Entrance Vestibule System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, System Sensor Date of last known Upgrade: 2023 Most Recent Known Modification: N/A Year Opened: 1980 |
Mission Royale is a low-rise apartment building located at 626 24 Ave SW, in Calgary, Alberta, Canada. The building was built in 1980, and the fire alarm system was upgraded in 2023. This page will showcase both the current and original systems.
System Specifications (2023-present)
FACP
The building is protected by a Fire-Lite ES-200X addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Fire-Lite's LiteSpeed addressable protocol, and the system coding is temporal.
Notification Appliances
All notification appliances are System Sensor "L-Series" P2RLED-B horn/strobes (red, wall-mount, bilingual lettering, set to 15cd).
Initiating Devices
Pull Stations
All pull stations are Fire-Lite BG-12LX addressable dual-action pull stations.
Automatic Detection Devices
There are Fire-Lite SD365A addressable photoelectric smoke detectors throughout all corridors, at the top of each stairwell, at the top of the elevator shaft, and in the elevator machine room.
There are Fire-Lite H365RA addressable 135°F fixed-temperature/rate-of-rise heat detectors in all boiler and telephone rooms.
All detectors are mounted on System Sensor B300A-6 bases.
Modules
There are Fire-Lite CRF-300A addressable relay modules for elevator recall and door control.
There are Fire-Lite I300A isolator modules on the SLC.
EOLs
There are Fire-Lite EOL-CR end of line resistor plates on all signal circuits.
Former System Specifications (1980-2023)
| Former System Specifications |
|---|
| FACP: Edwards 2280 FACP Location: Main Entrance Vestibule System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Continuous Strobes Synchronized: N/A Most Recent Known Modification: 2010s, Smokes Year Installed: 1980 Year + Reason Decommissioned: 2023, Elevator Upgrade |
FACP
The building was protected by an Edwards 2280 conventional fire alarm system. The panel was located in the main entrance vestibule. The system coding was continuous.
Notification Appliances
All notification appliances were Edwards "Durabel" 6100D vibrating bells (6" gong).
Initiating Devices
Pull Stations
All pull stations were Edwards 270-SPO conventional single-action pull stations.
Automatic Detection Devices
There were System Sensor C2W-BA conventional photoelectric smoke detectors in all corridors and at the top of each stairwell.
There were Potter CR-135W conventional 135°F fixed-temperature/rate-of-rise heat detectors in the storage and elevator rooms.
There were Potter CF-200W conventional 200°F fixed-temperature heat detectors in the mechanical and telephone rooms.
EOLs
There were Edwards EOL-P1 end of line resistor plates on all circuits.