More actions
| System Specifications |
|---|
| FACP: Edwards 2280 FACP Location: E2 Main Entrance System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Continuous Date of last known Upgrade: N/A Most Recent Known Modification: Late 2010s (Smokes) Year Opened: 1977 |
Raintree Village is an apartment building complex located at 6651 Ranchview Drive NW, Calgary, Alberta. This page will cover building E. The building was completed in 1977, and the fire alarm system is mostly original, with parts replaced as deficiencies occur.
System Specifications
FACP
The building is protected by an Edwards 2280 conventional fire alarm system. The panel is located at the main entrance of E2. The system coding is continuous.
Notification Appliances
Most notification appliances are Edwards "Adaptabel" 343D vibrating bells (10" gong).
There is a Mircom BL-6B motor bell (6" gong) and a Mircom BL-10B motor bell (10" gong), both installed as deficiency replacements.
Initiating Devices
Pull Stations
All pull stations are Edwards 270-SPO conventional single-action pull stations.
Automatic Detection Devices
There are System Sensor C2W-BA conventional photoelectric smoke detectors in the corridors on each floor.
There are FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detectors at the top of each stairwell.
There are Mirtone 73330 conventional 135°F fixed-temperature heat detectors in the electrical and laundry rooms.
The mechanical rooms have FDD CF-200W conventional 200°F fixed-temperature heat detectors.