More actions
System Specifications |
---|
FACP: Notifier NFS2-640C FACP Location: Main Entrance System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, System Sensor Date of last known Upgrade: 2018 Year Opened: 1984 |
Real Canadian Superstore is a chain of supermarkets owned by Loblaws. This particular store is located at 4821 Calgary Trail Northwest, in Edmonton, Alberta, Canada. The store opened in 1984, and received a full fire alarm system upgrade in 2018.
System Specifications (2020-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by a Notifier NFS2-640C conventional fire alarm system. The panel is located in the main entrance vestibule, and is equipped with two Notifier XP6-MA zone cards. The system coding is temporal.
Notification Appliances[edit | edit source]
All notification appliances are System Sensor “L-Series” P2RLA horn/strobes (red, wall-mount, bilingual lettering, set to 15cd).
The backroom has Mircom BL-6 motor bells (6" gong), left over from the previous system.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations are Notifier NBG-12L conventional dual-action pull stations.
Automatic Detection Devices[edit | edit source]
None noticed.
EOLs[edit | edit source]
There are Notifier EOL-CR end-of-line resistor plates on all circuits.
System Specifications (2000s-2018)[edit | edit source]
Former System Specifications |
---|
FACP: Mircom Series FA-1000 FACP Location: Main Entrance Vestibule System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Continuous Date of last known Upgrade: N/A Year Installed: 2000s Year Decommissioned: 2018 |
FACP[edit | edit source]
The building was protected by a Mircom Series FA-1000 conventional fire alarm system. The panel was located in the main entrance vestibule. The system coding was continuous.
Notification Appliances[edit | edit source]
Most notification appliances were Mircom BL-10B motor bells (10" gong).
There were some Mircom BL-10A motor bells (10" gong).
The backroom has Mircom BL-6 motor bells (6" gong), which are still in service.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations were Mircom MS-401 conventional single-action pull stations.
Automatic Detection Devices[edit | edit source]
None noticed.
EOLs[edit | edit source]
There were Mircom MP-300 end-of-line resistor plates on all circuits.