Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Spruce Ridge Estates Building 3370/3372

From FireAlarmPedia
System Specifications
FACP: Notifier System 500
FACP Location: 3370 Entrance Vestibule
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: 1998
Year Opened: 1953

Spruce Ridge Estates is a set of apartment buildings owned by Boardwalk. This page will cover buildings 3370 and 3372, located on 3370/3372 Spruce Drive SW, Calgary, AB. The buildings were built in 1953, and the fire alarm system was upgraded in 1998.

System Specifications (1998-present)

FACP

The buildings are protected by a Notifier System 500 conventional fire alarm system. The panel is located in 3370’s entrance vestibule. The system coding is temporal.

Notification Appliances

All common area notification appliances are System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, 15cd).
There is a System Sensor “L-Series” P2WLA horn/strobe (white, wall-mount, set to 15cd) in one corridor of the second floor.
Each suite has a System Sensor PA400SR-A mini-horn (red, silenceable) with a System Sensor S2415A remote strobe (red, wall-mount, 15cd).

Initiating Devices

Pull Stations

Most pull stations are Notifier NFM-950B conventional single-action pull stations.
There is a Mircom MS-401 conventional single-action pull station as a deficiency replacement.
There are Fire-Lite MPS-950BF conventional single-action pull stations in some areas.

Automatic Detection Devices

There are System Sensor “i3” C2W-BA conventional photoelectric smoke detectors in most areas.
There are System Sensor DH100PA conventional photoelectric duct smoke detectors on each MUA.
There is an FDD CR-135 conventional 135॰F fixed-temperature/rate-of-rise heat detector in the under-stair storage.
The mechanical room has a Mircom TD-200 conventional 200॰F fixed-temperature heat detector.

EOLs

There are Notifier EOL-CR end-of-line resistor plates on all circuits.