Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Stoney Nakoda Health Centre

From FireAlarmPedia
System Specifications
FACP: Notifier NFS-320C
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: 2023
Most Recent Known Modification: N/A
Year Opened: 1998, 2023

Stoney Nakoda Health Centre is a health centre located on the Stoney Nakoda First Nation, in Mini Thni, Alberta, Canada. The building was built in 1998, and was expanded and renovated in 2023. The fire alarm system was upgraded as part of the 2023 expansion and renovation.

System Specifications (2023-present)

FACP

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Notifier's FlashScan addressable protocol, and the system coding is temporal.

Booster Panels

There is a Notifier ACPS-610 addressable booster power supply in the mechanical room.

Notification Appliances

Most notification appliances are System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, bilingual lettering, set to 15cd).
There are System Sensor SRLA remote strobes (red, wall-mount, bilingual lettering, set to 15cd) in all washrooms.

Initiating Devices

Pull Stations

All pull stations are Notifier NBG-12LX addressable dual-action pull stations.

Automatic Detection Devices

There are Notifier FSP-951A addressable photoelectric smoke detectors throughout all corridors, and in all electrical, data and server rooms.
There are Notifier FST-951RA addressable 135°F fixed-temperature/rate-of-rise heat detectors in all storage rooms, all kitchens, some event rooms, and in the dental mechanical room. There are two Notifier FST-951A addressable 135°F fixed-temperature heat detectors in the mechanical room.
All detectors are mounted on System Sensor B300A-6 bases.

Modules

There are Notifier FRM-1A addressable relay modules serving various purposes.
There are Notifier ISO-XA isolator modules on the SLC.

EOLs

There are Notifier EOL-CR end of line resistor plates on all signal circuits.

Former System Specifications (1998-2023)

Former System Specifications
FACP: Notifier SFP-400B
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: No
Most Recent Known Modification: N/A
Year Installed: 1998
Year Decommissioned: 2023

FACP

The building was protected by a Notifier SFP-400B conventional fire alarm system. The panel was located in the main entrance vestibule. The system coding was continuous.

Notification Appliances

All notification appliances were System Sensor "Multi-Alert" MASS24LOA sounder/strobes (red, wall-mount, 1.5cd).

Initiating Devices

Pull Stations

Most pull stations were Notifier NFM-950B conventional single-action pull stations.
Some areas had Simplex MS-301C conventional single-action pull stations as deficiency replacements.

Automatic Detection Devices

There were FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detectors in most rooms.
There were FDD CF-200 conventional 200°F fixed-temperature heat detectors in the mechanical room.

EOLs

There were Notifier EOL-CR end of line resistor plates on all circuits.