More actions
| System Specifications |
|---|
| FACP: Notifier NFS-320C FACP Location: Unknown System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, System Sensor Date of last known Upgrade: 2020 Most Recent Known Modification: N/A Year Opened: 1978 |
Sundance Mall is a small mall located at 215 Banff Ave, Banff, Alberta, Canada. The mall opened in 1978, and the fire alarm system was upgraded in 2020.
System Specifications (2020-present)
FACP
The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel location is unknown. The system runs Notifier's FlashScan addressable protocol, and the system coding is temporal.
Annunciators
There is a Notifier LCD2-80 annunciator paired with a Notifier ACM-24AT annunciator in the main entrance vestibule.
Notification Appliances
All notification appliances are System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, set to 15cd).
Initiating Devices
Pull Stations
All pull stations are Notifier NBG-12LX addressable dual-action pull stations.
Automatic Detection Devices
There are Notifier FSP-951A addressable photoelectric smoke detectors in the stairwells.
There are Notifier FST-951A addressable 135°F fixed-temperature heat detectors in the electrical rooms.
All detectors are mounted on System Sensor B300A-6 bases.
EOLs
There are Notifier EOL-CR end-of-line resistor plates on all signal circuits.
Former System Specifications (1978-2020)
| Former System Specifications |
|---|
| FACP: Edwards 2280 FACP Location: Unknown System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Continuous Date of last known Upgrade: N/A Most Recent Known Modification: 1990s Year Installed: 1978 Year Decommissioned: 2020 |
FACP
The building was protected by an Edwards 2280 conventional fire alarm system. The panel location was unknown. The system coding was continuous.
Annunciators
There was an Edwards annunciator at the entrance, model unknown.
Notification Appliances
All notification appliances but one were Edwards "Durabel" 6100D vibrating bells (6" gong).
There was an Edwards 439D-6AWC vibrating bell as a deficiency replacement.
Initiating Devices
Pull Stations
All pull stations were Edwards 270-SPO conventional single-action pull stations.
Automatic Detection Devices
There were Edwards 281A conventional 135°F fixed-temperature/rate-of-rise heat detectors at the top of each stairwell and in the electrical rooms.