Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Trico Centre For Family Wellness

From FireAlarmPedia
System Specifications
FACP: Kidde VS4
FACP Location: Ramp to Second Floor
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, EST
Date of last known Upgrade: 2019
Year Built: 1982

Trico Centre for Family Wellness (or simply Trico Centre, also called Family Leisure Centre), is a recreation complex located in Willow Park at 11150 Bonaventure Drive SE, in Calgary, Alberta, Canada. The building was built in 1982, and the fire alarm system was upgraded in 2019.

System Specifications (2019-present)

FACP

The building is protected by a Kidde VS4 addressable fire alarm system. The panel is located on the ramp to the second floor. The system runs Kidde's GSA addressable protocol, and the system coding is temporal.

Annunciators

There is a Kidde K-RLCD-C annunciator paired with a Kidde K-RLED24 annunciator in the main entrance vestibule, mounted in an Edwards RA-ENC2 enclosure.

Notification Appliances

Most notification appliances are a mix of Edwards 439D-10AWC vibrating bells (10" gong) and Edwards MB10-24 motor bells (10" gong) mounted on Edwards 403-5A-R strobe plates.
The men's locker room has a Mircom BL-10B motor bell (10" gong) mounted on an Amseco RSB24-153075 strobe plate (set to 15cd) as a deficiency replacement.

Initiating Devices

Pull Stations

All pull stations are Kidde/Vigilant GSA-M270 addressable single-action pull stations (device brands vary throughout).

Automatic Detection Devices

There are Kidde KI-PD addressable photoelectric smoke detectors at the top of each stairwell, and in a janitor closet near the Trico Arena.
There is a Kidde KI-HRD addressable 135°F fixed-temperature/rate-of-rise heat detector at the top of the elevator shaft.
All detectors are mounted on Kidde KI-SB bases.

Modules

There are Kidde GSA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.
There are Kidde GSA-CR addressable relay modules serving various purposes.
There are Kidde GSA-IM addressable isolator modules on all SLCs.

EOLs

There are Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.