Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Truth Church of Calgary

From FireAlarmPedia
System Specifications
FACP: Edwards 2280
FACP Location: Main Entrance
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Continuous
Date of last known Upgrade: 1977
Most Recent Known Modification: 2010s (Pull Station)
Year Opened: 1962

Truth Church is a pentecostal church located at 615 Northmount Dr NW, Calgary, Alberta, Canada. The church was built in 1962, and was expanded in 1977. The fire alarm system was installed during the expansion, with parts replaced as deficiencies occur.

System Specifications

FACP

The building is protected by an Edwards 2280 conventional fire alarm system. The panel is located in the main entrance. The system coding is continuous.

Notification Appliances

Most notification appliances are Edwards "Durabel" 6100D vibrating bells (6" gong).
The sanctuary has an Edwards 439D-6AWC vibrating bell (6" gong) as a deficiency replacement.
There is a Mircom BL-6B motor bell (6" gong) on the balcony as a deficiency replacement.

Initiating Devices

Pull Stations

Most pull stations are Edwards 270-SPO conventional single-action pull stations.
The 2nd floor hallway has an Edwards CCS-652 conventional single-action pull station.
There is a Mircom MS-401 and Summit SPS-101CA conventional single-action pull station each in the basement, both installed as deficiency replacements.

Automatic Detection Devices

There are FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detectors at the top of each stairwell and in some other areas.
The storage rooms, kitchen, sound booth and mechanical rooms have Edwards 245A conventional 135°F fixed-temperature heat detectors.
One storage room has a System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detector.

EOLs

There are red end-of-line resistor plates on all circuits.