Vista Pointe A

System Specifications
FACP: Mircom FX-2000 FACP Location: Main Entrance Vestibule System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Mircom Date of last known Upgrade: N/A Year Opened: 2013

Vista Pointe is an apartment complex owned by Broadstreet. This page will cover Building 404, located at 404 McConachie Way NW, in Edmonton, Alberta, Canada. The building was built in 2013, and the fire alarm system is original.

System Specifications

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances

All common areas have Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd).
All suite bedrooms have Mircom MH-S25WA silenceable mini-horns (white).

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices

There are Mircom MIX-2251BA addressable photoelectric smoke detectors throughout all common areas.
There are Mircom MIX-5251HBA addressable 190°F fixed-temperature/rate-of-rise heat detectors in the mechanical room.
All aforementioned detectors are mounted on System Sensor B210LPA bases.
There are System Sensor DNRA duct smoke detector housings with Mircom MIX-2251BA addressable photoelectric head on all make up air units.

Modules

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Mircom MIX-M500RA addressable relay modules for elevator recall and MUA shutdown.
There are System Sensor M500XA isolator modules at each stairwell on each floor.

EOLs

There are Mircom MP-300 end of line resistor plates on all sprinkler and Class-B signal circuits.