Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Walmart Supercentre (Windermere)

From FireAlarmPedia
System Specifications
FACP: Edwards iO1000
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2023
Year Opened: 2008

Walmart is a chain of big box stores across the world. This particular store is located at 6110 Currents Drive NW, Edmonton, Alberta. The store opened in 2009, and the fire alarm system is original, with a panel upgrade in 2023. The building also houses Planet Fitness.

System Specifications (2008-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an Edwards iO1000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Edwards’ Signature addressable protocol, and the system coding is temporal.
The iO1000 replaced the original EST QuickStart QS1 in 2023.

Notification Appliances[edit | edit source]

All indoor notification appliances are from EST’s “Genesis” line of products.
The main notification appliances are EST G1-HDVM horn/strobes (white, wall-mount, no marking, set to 15cd), and also EST G1-VM remote strobes (white, wall-mount, no marking, set to 15cd).. These are mounted on poles in groups of 4, with two horn/strobes opposite each other, and two strobes opposite each other. The aforementioned horn/strobes are also installed by exits.
For exterior notification, there is an EST “Integrity” 757-7A-T horn/strobe (red, wall-mount, 15/75cd) outside the mechanical room.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are EST SIGA-IM isolator modules on each SLC.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.