Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

West Edmonton Volkswagen

From FireAlarmPedia
System Specifications
FACP: Kidde VS4
FACP Location: Main Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2023
Year Opened: 1977

West Edmonton Volkswagen is a Volkswagen car dealership located at 10220 170 Street Northwest, in Edmonton, Alberta, Canada. The dealership opened in 1977, as Toyota Village, which later became Mayfield Toyota in 1983, and moved to West Edmonton Mall in 2021. The Volkswagen dealership moved into the space in 2023, and the fire alarm system was upgraded.

System Specifications (2023-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Kidde VS4 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Kidde's GSA addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are Kidde "Genesis" EG1AVRF horn/strobes (red, wall-mount, FIRE marking, set to 15cd).
Some areas have Kidde EG1VRF remote strobes (red, wall-mount, FIRE marking, set to 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Kidde GSA-M270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed, waterflow is present.

Modules[edit | edit source]

There are Kidde GSA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.
There are Kidde GSA-CR addressable relay modules serving various purposes.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.

Former System Specifications (2006-2023)[edit | edit source]

System Specifications
FACP: Mircom FX-2000
FACP Location: Main Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: N?A
Year Installed: 2006
Year Decommissioned:

FACP[edit | edit source]

The building was protected by a Mircom FX-2000 addressable fire alarm system. The panel was located in the main entrance vestibule. The system ran Mircom’s CLIP addressable protocol, and the system coding was temporal.

Notification Appliances[edit | edit source]

All notification appliances were Mircom “Select-A-Horn/Strobe” FHS-240W horn/strobes (white, wall-mount, set to 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations were Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

The building was equipped with a wet sprinkler system. There were no detectors in the main showroom.

Modules[edit | edit source]

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There were Mircom MIX-M500RA addressable relay modules serving various purposes.

EOLs[edit | edit source]

There were Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.