Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

West Hillhurst Community Association

From FireAlarmPedia
System Specifications
FACP: Mircom FX-2000
FACP Location: Main Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: 2015
Most Recent Known Modification: 2023, Pulls
Year Opened: 1971

The West Hillhurst Community Association is a community centre located at 1910 6 Ave NW, in Calgary, Alberta, Canada. The building was built in 1971, and the fire alarm system was upgraded in 2015.

System Specifications (2015-present)

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located at the main entrance. The system runs Mircom's Advanced addressable protocol, and the system coding is temporal.

Notification Appliances

All notification appliances are System Sensor "SpectrAlert Advance" P2RA horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AP addressable single-action pull stations.

Automatic Detection Devices

There are Mircom MIX-5251RAPA addressable 135°F fixed-temperature/rate-of-rise heat detectors in some areas.
There are Mircom MIX-2251APA addressable photoelectric smoke detectors at the top of each stairwell.
All detectors are mounted on System Sensor B210LPA bases.

Modules

There are Mircom MIX-M500RAPA addressable relay modules serving various purposes.
There are System Sensor M500XA isolator modules on the SLC.
There is a System Sensor MDL3RA sync module synchronizing all horn/strobes.

EOLs

There are Mircom MP-300 end of line resistor plates on all signal circuits.