More actions
| System Specifications |
|---|
| FACP: Mircom FA-1000 FACP Location: Centre Hallway Exit System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Mircom Date of last known Upgrade: N/A Most Recent Known Modification: 2023, FACP Year Opened: Early 2010s |
Willow Lodge is a Suncor camp located in Wood Buffalo, Alberta, Canada. This page will cover Building M1, which was built in the early 2010s. The fire alarm system is mostly original, with an FACP replacement occurring in 2023.
System Specifications
FACP
The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel is located at the centre hallway exit. The system coding is temporal.
This panel replaced a Mircom FA-101T.
Notification Appliances
All common areas have Mircom "Select-a-Horn/Strobe" FHS-340R horn/strobes (red, wall-mount, set to 15cd/electromechanical).
All dorm rooms have Mircom FS-400-RR remote strobes (red, wall-mount, set to 15cd) paired with Mircom MH-S25WA silenceable mini-horns (white).
Initiating Devices
Pull Stations
All pull stations are Mircom MS-401 conventional single-action pull stations.
Automatic Detection Devices
There are System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors in all service and dorm rooms.
There are System Sensor 5604A conventional 194°F fixed-temperature heat detectors in all water heater and laundry rooms.
There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all corridors.
Modules
There is a Mircom MIX-4050 sync module synchronizing all strobes.
EOLs
There are Mircom MP-300 end of line resistor plates on all circuits.