More actions
| System Specifications |
|---|
| FACP: Mircom FA-1000 FACP Location: Centre Hallway Exit System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Mircom Date of last known Upgrade: N/A Most Recent Known Modification: 2023, FACP Year Opened: Early 2010s |
Willow Lodge is a Suncor camp located in Wood Buffalo, Alberta, Canada. This page will cover Building P1, which is a dormitory building. The building was built in the early 2010s, and the fire alarm system is mostly original, with an FACP replacement occurring in 2023.
System Specifications
FACP
The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel is located at the centre hallway exit. The system coding is temporal.
Notification Appliances
All common areas have Mircom "Select-A-Horn/Strobe" FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd).
All dorm rooms have Mircom FS-400-RR remote strobes (red, wall-mount, set to 15cd) paired with Mircom MH-S25WA silenceable mini-horns (white).
Initiating Devices
Pull Stations
All pull stations but one are Mircom MS-401 conventional single-action pull stations.
There is an Edwards 270-SPO conventional single-action pull station in the centre hallway exit.
Automatic Detection Devices
There is an Edwards 281B-PL conventional 135°F fixed-temperature heat detector in the janitor room.
The furnace rooms and laundry rooms have Edwards 284B-PL conventional 194°F fixed-temperature
There are Mircom TD-135 conventional 135°F fixed-temperature heat detectors in the storage rooms.
Some furnace rooms have Mircom TD-200 conventional 200°F fixed-temperature heat detectors as deficiency replacements.
Each dorm has a System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detector.
The water heater room has a System Sensor 5604A conventional 194°F fixed-temperature heat detector.
There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all common areas.
Modules
There is a Mircom MIX-4050 sync module synchronizing all strobes.
EOLs
There are Mircom MP-300 end-of-line resistor plates on all circuits.