Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Willow Lodge S2

From FireAlarmPedia
System Specifications
FACP: Mircom FA-1000
FACP Location: Centre Hallway Exit
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Mircom
Date of last known Upgrade: N/A
Most Recent Known Modification: 2023, FACP
Year Opened: Mid 2010s

Willow Lodge is a Suncor camp located in Wood Buffalo, Alberta, Canada. This page will cover Building S2, which is a dormitory building built in the mid 2010s. The fire alarm system is mostly original, with an FACP replacement occurring in 2023.

System Specifications

FACP

The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel is located at the centre hallway exit. The system coding is temporal.
This panel replaced a Mircom FA-101T.

Notification Appliances

All common areas have Mircom "Select-A-Horn/Strobe" FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd).
All dorm rooms have Mircom FS-400-RR remote strobes (red, wall-mount, set to 15cd) paired with Mircom MH-S25WA silenceable mini-horns (white).

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401 conventional single-action pull stations.

Automatic Detection Devices

There are Mircom TD-135 conventional 135°F fixed-temperature heat detectors in all service and dorm rooms.
There are Mircom TD-200 conventional 200°F fixed-temperature heat detectors in all water heater and laundry rooms.
There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all corridors.

Modules

There is a Mircom MIX-4050 sync module synchronizing all strobes.

EOLs

There are Mircom MP-300 end of line resistor plates on all circuits.