Editing Inglewood 1410

{| style="float:right;border:2px solid black"
|-
! System Specifications
|-
| 
|-
| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: Yes, Mircom <br />Date of last known Upgrade: N/A <br />Year Opened: 2014
|}


'''Inglewood 1410''' is a condo building located at 1410 9 Ave SE, Calgary, Alberta.  It was built in 2014, and the fire alarm system is original.

==System Specifications==
====FACP====
The building is protected by a Mircom FX-2000 addressable fire alarm system.  The panel is located in the main entrance vestibule.  The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

====Notification Appliances====
The common areas of the building have Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to broadband/15cd). <br> The bedrooms of the suites have Mircom MH-S25WA silenceable mini-horns (white, wall-mount).

===Initiating Devices===
====Pull Stations====
All pull stations are Mircom MS-401AD addressable single-action pull stations.

====Automatic Detection Devices====
There are Mircom MIX-2251APA addressable photoelectric smoke detectors throughout the building’s common areas, mounted on System Sensor B210LPA bases.

==== Modules ====

There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system's tamper and flow switches. <br> There are Mircom MIX-M500RAPA addressable relay modules serving various purposes. <br> There is a Mircom SDM-240 sync module on the signal circuit. <br>  There are System Sensor M500XA isolator modules on each SLC.

==== EOLs ====


There are Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.

[[Category:Residential]]
[[Category:Calgary]]