More actions
(I dislike EST.) |
No edit summary |
||
| (7 intermediate revisions by 3 users not shown) | |||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
| FACP: EST QuickStart QS1 <br /> FACP Location: Electrical Room <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: | | FACP: EST QuickStart QS1 <br /> FACP Location: Electrical Room <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: No <br />Date of last known Upgrade: 2015 <br />Year Opened: 2009 | ||
|} | |} | ||
'''Crowfoot Station''' is an LRT station located at 141 Crowfoot Way Northwest, in Calgary, Alberta, Canada. The station primarily serves the neighborhoods of Crowfoot and Scenic Acres, as well as the Crowfoot Crossing shopping area. The station also has bus connections to several nearby communities. The station opened in 2009, and served as the terminus for the red line until the opening of [[Tuscany Station]] in 2013. The fire alarm system may or may not be original. | |||
'''Crowfoot Station''' is an LRT station located at 141 Crowfoot Way Northwest, in Calgary, Alberta, Canada. | ==System Specifications (2009-present)== | ||
==System Specifications== | |||
====FACP==== | ====FACP==== | ||
The building is protected by an EST QuickStart QS1 addressable fire alarm system. | The building is protected by an EST QuickStart QS1 addressable fire alarm system. The panel is located in an electrical room. The system runs EST’s Signature addressable protocol, and the system coding is temporal. | ||
====Notification Appliances==== | ====Notification Appliances==== | ||
All notification appliances are System Sensor “SpectrAlert” | All notification appliances are System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, 15cd, set to electromechanical). | ||
===Initiating Devices=== | ===Initiating Devices=== | ||
====Pull Stations==== | ====Pull Stations==== | ||
Most pull stations are EST SIGC-270B addressable single-action pull stations with bilingual lettering (English/French). Some areas have EST SIGA-270 addressable single-action pull stations; these can also be found as deficiency replacements. | |||
====Automatic Detection Devices==== | |||
There are EST SIGA-PS addressable photoelectric smoke detectors throughout the station, mounted on EST SIGA-SB bases. The station is not equipped with a sprinkler system. | |||
==== | ==== EOLs ==== | ||
There are | There are Edwards EOL-P1 end-of-line resistor plates on the signal circuit. | ||
== Known Activations == | |||
==== Tuesday, December 26, 2023 ==== | |||
At approximately 9:30 AM, the system went off due to the East Platform Exit pull station being activated. The station was pulled falsely, and there was no emergency. | |||
Latest revision as of 10:01, 24 September 2024
| System Specifications |
|---|
| FACP: EST QuickStart QS1 FACP Location: Electrical Room System Type: Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: No Date of last known Upgrade: 2015 Year Opened: 2009 |
Crowfoot Station is an LRT station located at 141 Crowfoot Way Northwest, in Calgary, Alberta, Canada. The station primarily serves the neighborhoods of Crowfoot and Scenic Acres, as well as the Crowfoot Crossing shopping area. The station also has bus connections to several nearby communities. The station opened in 2009, and served as the terminus for the red line until the opening of Tuscany Station in 2013. The fire alarm system may or may not be original.
System Specifications (2009-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by an EST QuickStart QS1 addressable fire alarm system. The panel is located in an electrical room. The system runs EST’s Signature addressable protocol, and the system coding is temporal.
Notification Appliances[edit | edit source]
All notification appliances are System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, 15cd, set to electromechanical).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
Most pull stations are EST SIGC-270B addressable single-action pull stations with bilingual lettering (English/French). Some areas have EST SIGA-270 addressable single-action pull stations; these can also be found as deficiency replacements.
Automatic Detection Devices[edit | edit source]
There are EST SIGA-PS addressable photoelectric smoke detectors throughout the station, mounted on EST SIGA-SB bases. The station is not equipped with a sprinkler system.
EOLs[edit | edit source]
There are Edwards EOL-P1 end-of-line resistor plates on the signal circuit.
Known Activations[edit | edit source]
Tuesday, December 26, 2023[edit | edit source]
At approximately 9:30 AM, the system went off due to the East Platform Exit pull station being activated. The station was pulled falsely, and there was no emergency.