Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Safeway (Shawnessy): Difference between revisions

From FireAlarmPedia
No edit summary
(Rewrote the page to reflect current standards.)
 
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Simplex 4007ES
| FACP: Simplex 4007ES <br>FACP Location: Main Entrance Vestibule<br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage:24VDC <br>System Coding: Temporal <br>Strobes Synchronized: Yes, SmartSync<br />Date of last known Upgrade: 2017<br />Year Opened: 1990
FACP Location: Main Entrance<br />System Type: Single-Stage Conventional<br /> System Line Voltage: 120VAC<br />NAC Voltage:24VDC  
 
System Coding: Temporal
 
Strobes Synchronized: SmartSync<br />Date of last known Upgrade: 2017<br />Year Opened: 1990
|}
|}
Safeway is a chain of grocery stores in North America. This particular location is located at 70 Shawville Blvd SE, Calgary and was built in 1990, and expanded in 1996. The fire alarm system was upgraded in 2017.  
'''Safeway Canada''' is a chain of grocery stores owned by Empire. This particular store is located at 70 Shawville Blvd SE, in Calgary, Alberta, Canada.  The store was built in 1990, and was expanded in 1996. The fire alarm system was upgraded in 2017.  
== System Specifications (2017-present) ==
== System Specifications (2017-present) ==
NOTE: This store has undergone renovations since creation of this page.  These system specifications may not be fully accurate.
==== FACP ====
==== FACP ====
The store is protected by a Simplex 4007ES conventional fire alarm system. The panel is located at the main entrance, and was installed in 2017, replacing an EST 6616. The system coding is temporal.
The building is protected by a Simplex 4007ES conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal.
 
This panel replaced an Edwards 6616.
==== Notification Appliances ====
==== Notification Appliances ====
The notification appliances are all Simplex "TrueAlert" 4906-9127 (red, wall-mount, multi-candela) horn/strobes.  
All notification appliances are Simplex "TrueAlert" 4906-9127 horn/strobes (red, wall-mount, set to 15cd).
 
These replaced Edwards 439D-10AWC vibrating bells (10" gong).  
=== Initiating Devices ===
=== Initiating Devices ===
==== Pull Stations ====
==== Pull Stations ====
The pull stations are the original Edwards 270-SPO conventional pull stations, and were not replaced despite the upgrade.
All pull stations are Edwards 270-SPO conventional single-action pull stations.
==== Automatic Detection Devices ====
==== Automatic Detection Devices ====
Waterflow protection, no visible detectors.
None noticed.


==== EOLs ====
==== EOLs ====
There are Simplex 2081-9040C end-of-line resistor plates on all circuits.
There are Simplex 2081-9040C end-of-line resistor plates on all circuits.
== Former System Specifications (1996-2017) ==
{| style="float:right;border:2px solid black"
|-
! System Specifications
|-
|
|-
| FACP: EST 6616
FACP Location: Main Entrance<br />System Type: Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR
System Coding: Continuous<br />Date of last known Upgrade: N/A <br />Final Year In Active Service: 2017
|}
==== FACP ====
The store was formerly protected by an EST 6616 conventional fire alarm system. The panel was located in the main entrance. The system coding was continuous
==== Notification Appliances ====
The original notification appliances were Edwards 439D-10AWC vibrating bells (10" gong).
=== Initiating Devices ===
==== Pull Stations ====
The pull stations were and still are the Edwards 270-SPO. These are the only devices that were continued to be used on the new 4007ES.
==== Automatic Detection Devices ====
Not available.
==== EOLs ====
There are Edwards EOL-P1 end-of-line resistor plates on all circuits.


== Bonus Information ==
== Bonus Information ==
One of the original fire bells (Edwards 439D-10AWC) was wired to a doorbell button as well as the EST 6616, and when the doorbell button was pressed, the bell would ring softly to indicate a delivery. It was probably on 12VDC. It is unknown if the horn/strobe there goes off for deliveries, but it is in the same place as the bell that was there, as all the bells were replaced in 2017.
One of the original fire bells (Edwards 439D-10AWC) was wired to a doorbell button as well as the EST 6616, and when the doorbell button was pressed, the bell would ring softly to indicate a delivery. It was probably on 12VDC. It is unknown if the horn/strobe there goes off for deliveries, but it is in the same place as the bell that was there, as all the bells were replaced in 2017.
[[Category:Facilities]]
[[Category:Facilities]]
[[Category:Calgary]]
[[Category:Calgary]]
[[Category:Retail Stores]]
[[Category:Retail Stores]]

Latest revision as of 22:27, 21 December 2024

System Specifications
FACP: Simplex 4007ES
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage:24VDC
System Coding: Temporal
Strobes Synchronized: Yes, SmartSync
Date of last known Upgrade: 2017
Year Opened: 1990

Safeway Canada is a chain of grocery stores owned by Empire. This particular store is located at 70 Shawville Blvd SE, in Calgary, Alberta, Canada. The store was built in 1990, and was expanded in 1996. The fire alarm system was upgraded in 2017.

System Specifications (2017-present)[edit | edit source]

NOTE: This store has undergone renovations since creation of this page. These system specifications may not be fully accurate.

FACP[edit | edit source]

The building is protected by a Simplex 4007ES conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal.

This panel replaced an Edwards 6616.

Notification Appliances[edit | edit source]

All notification appliances are Simplex "TrueAlert" 4906-9127 horn/strobes (red, wall-mount, set to 15cd).

These replaced Edwards 439D-10AWC vibrating bells (10" gong).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

EOLs[edit | edit source]

There are Simplex 2081-9040C end-of-line resistor plates on all circuits.

Bonus Information[edit | edit source]

One of the original fire bells (Edwards 439D-10AWC) was wired to a doorbell button as well as the EST 6616, and when the doorbell button was pressed, the bell would ring softly to indicate a delivery. It was probably on 12VDC. It is unknown if the horn/strobe there goes off for deliveries, but it is in the same place as the bell that was there, as all the bells were replaced in 2017.