More actions
(Corrected infobox.) |
m (TwentyThree33 moved page 622 5 Avenue SW to 622 5 Avenue SW, Calgary: Page was made prior to Fire Alarmpedia expanding beyond Calgary. Move is being done to avoid confusion with other cities.) |
(No difference)
| |
Latest revision as of 09:58, 7 September 2024
| System Specifications |
|---|
| FACP: Notifier AFP-200 FACP Location: First Floor Custodian's Closet System Type: Single-Stage Hybrid-Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: No Date of last known Upgrade: 2021 Year Opened: 1978 |
622 5th Avenue SW is a multi-use 5-story office building located in the Commercial district of Downtown Calgary, Alberta, Canada. The building opened in 1978, but the system is mostly from 2002.
System Specifications[edit | edit source]
Please note that this page is missing information. This page should not be used for official purposes.
FACP[edit | edit source]
The building is protected by a Notifier AFP-200C addressable fire alarm system. The panel is located in a custodian's closet on the first floor. The system runs Notifier's CLIP addressable protocol, and the system coding is temporal. This panel replaced an Edwards Custom 6500.
Annunciators[edit | edit source]
There is a Notifier LCD-80 annunciator in the main entrance vestibule. It is mounted in the 6500’s cabinet.
Notification Appliances[edit | edit source]
All areas except the parkade have System Sensor "SpectrAlert Advance" PC2WA horn/strobes (white, ceiling-mount, set to 15cd). The parkade has System Sensor P2RA horn/strobes (red, wall-mount, set to 15cd).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
Most pull stations are Edwards 270-SPO conventional single-action pull stations. Some areas have Notifier MPS-950B conventional single-action pull stations as deficiency replacements. The addressable setup of this system is unknown at this time.
Automatic Detection Devices[edit | edit source]
There are Notifier FSP-851A addressable photoelectric smoke detectors located throughout the facility, mounted on System Sensor B210LPA low-profile bases. The mechanical rooms and some other areas have FDD CR135 conventional fixed/rate-of-rise heat detectors. [[]