Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Uplands Manor: Difference between revisions

From FireAlarmPedia
No edit summary
No edit summary
 
(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
'''Uplands Manor''' is a 5 story apartment building in Bankview, SW Calgary. The fire alarm system is another interesting apartment building system utilizing a single 120V circuit with AC bells simply wired in series-parallel with the initiating devices, with no panel in between. (See [[7044 Ogden Road SE]]) The building was constructed in 1969 and the fire alarm system is mostly original, except for the smoke detectors.
{| style="float:right;border:2px solid black"
==System Specifications==
|-
====FACP ====
! System Specifications
This system does not use a panel and the initiating devices are the control point.  
|-
 
|
|-
| FACP: None<br />System Type: 120V Hardwired <br /> System Line Voltage: 120VAC<br />NAC Voltage: 120VAC <br />Date of last known Upgrade: 2000s <br />Year Opened: 1969
|}
'''Uplands Manor''' is a 5 story apartment building located at 1608 22 Ave SW, Calgary, AB. The building was constructed in 1969 and the fire alarm system is mostly original, except for the smoke detectors.
==System Specifications (1969-present)==
The complex is protected by a hardwired 120V fire alarm system, with bells and initiating devices wired in series.  The system coding is continuous.
====Notification Appliances====
====Notification Appliances====
The notification appliances are quite rare. They are Edwards 1047 vibrating bells (6" gong, 120VAC). There is one bell per floor, for a total of five. They are original to the building.
All notification appliances are very rare Edwards 1047 vibrating bells (6" gong, 120VAC). There is one bell per floor, for a total of five. They are original to the building.
 
===Initiating Devices===
===Initiating Devices===
====Pull Stations====
====Pull Stations====
The pull stations consist of Edwards 270-SPO (1960s era, classic square E shield, FIRE ALARM at the top) single action pull stations, some of which have their original glass rod. They are likely original to the building. There are two on each floor at either stairwell.
All pull stations are first-generation Edwards CCS-642 or 270-SPO single action pull stations, some of which have their original glass rod. They are likely original to the building. There are two on each floor at either stairwell.
====Automatic Detection Devices====
There are a total of twenty American Sensors ESA5011 120v hardwired ionization smoke alarms installed in the building; two on each floor attached to each pull station (10), and one for each floor in the two stairwells. (10)


====Automatic Detection Devices====
It is possible that there is one more in the elevator mechanical room.


There are a total of twenty American Sensors ESA5011 120v hardwired ionization smoke alarms installed in the building. Two on each floor attached to each pull station (10), and one for each floor in the two stairwells. (10) It is possible that there is one more in the elevator mechanical room. These were installed later, possibly 2000s-2010s.
There is also a Mirtone 73330 fixed-temperature heat detector in the Laundry room near the mechanical room door.
[[Category:Facilities]]
[[Category:Residential]]
[[Category:Calgary]]

Latest revision as of 13:47, 22 May 2025

System Specifications
FACP: None
System Type: 120V Hardwired
System Line Voltage: 120VAC
NAC Voltage: 120VAC
Date of last known Upgrade: 2000s
Year Opened: 1969

Uplands Manor is a 5 story apartment building located at 1608 22 Ave SW, Calgary, AB. The building was constructed in 1969 and the fire alarm system is mostly original, except for the smoke detectors.

System Specifications (1969-present)

The complex is protected by a hardwired 120V fire alarm system, with bells and initiating devices wired in series. The system coding is continuous.

Notification Appliances

All notification appliances are very rare Edwards 1047 vibrating bells (6" gong, 120VAC). There is one bell per floor, for a total of five. They are original to the building.

Initiating Devices

Pull Stations

All pull stations are first-generation Edwards CCS-642 or 270-SPO single action pull stations, some of which have their original glass rod. They are likely original to the building. There are two on each floor at either stairwell.

Automatic Detection Devices

There are a total of twenty American Sensors ESA5011 120v hardwired ionization smoke alarms installed in the building; two on each floor attached to each pull station (10), and one for each floor in the two stairwells. (10)

It is possible that there is one more in the elevator mechanical room.

There is also a Mirtone 73330 fixed-temperature heat detector in the Laundry room near the mechanical room door.