Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Calgary International Airport: Difference between revisions

From FireAlarmPedia
(correcting some stuff, and adding more.)
(GIANT overhaul!!!)
 
(17 intermediate revisions by 3 users not shown)
Line 1: Line 1:
'''Calgary International Airport''', also simply known as '''YYC Airport''' is an international airport that serves Calgary. It is in NE Calgary.  It is the fourth largest airport in Canada, and the largest and busiest airport in Alberta. It was built in the late 1930s, and the Domestic terminal was built in 1977, and the International terminal was built in 2016.  The International terminal has the original fire alarm system, but the Domestic terminal does not. It does have hotels, some with their own fire alarm system. All systems are wired to trip each other when one goes into alarm.
'''Calgary International Airport''', also simply known as '''YYC Airport''' is an international airport that serves Calgary. It is located at 2000 Airport Rd NE, Calgary, AB, is the fourth largest airport in Canada, and the largest and busiest airport in Alberta. It was built in the late 1930s, and the Domestic terminal was built in 1977, and the International terminal was built in 2016.  


The International terminal has the original fire alarm system, and the Domestic terminal's system was installed in the early to mid 2000s; Concourse D was opened in 2002, and concourses B and C were renovated in 2005.
==System Specifications (International Terminal)==
==System Specifications (International Terminal)==
{| style="float:right;border:2px solid black"
|-
! System Specifications
|-
|
|-
| FACP: Simplex 4100ES <br>FACP Location: Near In-Terminal Marriott Hotel (Main Node)<br />System Type: Two-Stage Networked Addressable<br /> System Line Voltage: 120VAC<br />NAC Voltage: 70.7VRMS (audible) <br> 24VDC (visuals) <br>System Coding: Unknown <br>Strobes Synchronized: Yes, SmartSync<br />Date of last known Upgrade: N/A <br />Year Opened: 2016
|}
====FACP====
This terminal is protected by a Simplex 4120 networked fire alarm system. All nodes are Simplex 4100ES addressable panels, the main node is located somewhere near the in-terminal Marriott hotel according to an airport safety plan. The system runs Simplex's IDNet addressable protocol, and is equipped with voice-evacuation. The system is configured for two-stage operation. The tones and messages are unknown at this time.
====Notification Appliances====
All of the notification appliances are from Simplex's "TrueAlert" line of products.


====FACP====
Most notification appliances are Simplex 4906-9153 speaker/strobes (white, wall-mount, set to 15cd).  
The fire alarm panel is a two-stage Simplex 4100ES, and is located somewhere near the in-terminal Marriott hotel, according to an airport safety plan.  It is a voice-evac system, and likely has the InfoAlarm command center.


====Notification Appliances====
Some areas have Simplex 4906-9157 speaker/strobes (white, ceiling-mount, set to 15cd).  
The main notification appliances are Simplex "TrueAlert" 4906-9153 (White, wall) speaker/strobes, Simplex "TrueAlert" 4906-9254 (white, ceiling) addressable speaker/strobes, and Simplex "TrueAlert" 4902-9717 (white wall) speakers, and Simplex 4902-9721 (white, ceiling) speakers where more sound coverage is needed.


In areas where more sound coverage is needed, there are Simplex 4902-9721CA remote speakers (white, ceiling-mount), and Simplex 4902-9717CA remote speakers (white, wall-mount).
===Initiating Devices===
===Initiating Devices===
====Pull Stations====
All pull stations are Simplex 4099-9004CA addressable two-stage single-action pull stations.
====Automatic Detection Devices====
There are Simplex 4098-9714 addressable photoelectric smoke detectors throughout the terminal, mounted on 4098-9792 bases.
==== Modules ====
There are Simplex 4090-9001 addressable monitor modules supervising the sprinkler system's tamper and flow switches.
There are Simplex 4090-9002 addressable relay modules serving various purposes.


====Pull Stations====
There are Simplex 4090-9116 isolator modules on the SLCs.
The pull stations are all Simplex 4099-9004CA two-stage, addressable pull stations.


====Automatic Detection Devices====
==== Firefighter's Telephones ====
There are Simplex 4098-9714 addressable photoelectric smoke detectors throughout the terminal.
There are Simplex 2084-9103 firefighter's telephones on each floor of the airport and networked hotel.


==System Specifications (Domestic Terminal)==
==== EOLs ====
There are Simplex 2081-9040C end-of-line resistor plates on all sprinkler and signal circuits.


==System Specifications (Domestic Terminal) (2002-present)==
{| style="float:right;border:2px solid black"
|-
! System Specifications
|-
|
|-
| FACP: Simplex 4100ES <br>FACP: CACF Room (Main Node)<br />System Type: Two-Stage Networked Addressable<br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC  <br>System Coding: 20BPM (Alert) <br>Temporal (Alarm) <br>Strobes Synchronized: Yes, Wheelock<br />Date of last known Upgrade: 2016 <br />Year Opened: 1977
|}
====FACP====
====FACP====
The fire alarm panel for this terminal is also a two stage Simplex 4100ES. Unlike the other terminal, this one is not voice-evac. It replaced a Simplex 4100U in around 2016, and the 4100ES is in the 4100U cabinet. It is located in the airlock of Departures Door 1. When the system goes into fire alarm, it does 20BPM march time in first stage, and temporal/code-3 in general alarm.  
This terminal is protected by a Simplex 4120 networked fire alarm system. All nodes are Simplex 4100ES addressable panels. The main panel is located in the CACF room near the former Concourse B security checkpoint, and an auxiliary panel is located in the vestibule of Departures Door 1. The system runs Simplex's IDNet addressable protocol, and is configured for two-stage operation. The alert signal coding is 20BPM, followed by temporal as the evacuation signal.


The 4100ES replaced a Simplex 4100U in 2016 to network to the new terminal; the cabinets were kept.
====Notification Appliances====
====Notification Appliances====
The main notification appliances are Simplex 2901-9724 motor bells on Wheelock RSSP-24MCW strobe plates. There are also some Simplex 4904-9105 strobes throughout the terminal. The bell/strobes were installed when the 4100U was installed, and the remote strobes were from a previous system.
All audible notification appliances are Simplex 2901-9724 motor bells (10" gong). Most are mounted on Wheelock RSSP-2415W strobe plates (red, 15cd). Some bells are mounted remotely, and some bells are mounted on Wheelock RSS-24MCW-FR strobe plates (red, set to 15cd).
 
The domestic parkade has Simplex 2901-9724 motor bells, with Wheelock RSSWP-2475W-FR weatherproof remote strobes (red, 75cd) mounted underneath them.  
 
The departures area also has Simplex 4904-9105 remote strobes (red, wall-mount, 110cd), mounted on the lowered ceilings of the entry doors.


There is also a Simplex 4904-9103 remote strobe (red, ceiling-mount, 4.75cd), fitted with a 4905-9902 lens (no marking).
The 4904-series strobes were installed in 1995.
===Initiating Devices===
===Initiating Devices===
==== Pull Stations ====
==== Pull Stations ====
The pull stations are Simplex 4099-9004CA addressable two-stage pull stations, installed when the 4100U was.
All pull stations are Simplex 4099-9004CA addressable two-stage single-action pull stations.
====Automatic Detection Devices====
There are Simplex 4098-9714 addressable photoelectric smoke detectors in some elevator lobbies, mounted on Simplex 4098-9792 bases.
==== Modules ====
There are Simplex 4090-9001 addressable monitor modules supervising the sprinkler system's tamper and flow switches.


====Automatic Detection Devices====
There are Simplex 4090-9002 addressable relay modules serving various purposes.
None noticed.
 
==== EOLs ====
There are Simplex 2081-9040C end-of-line resistor plates on all sprinkler and signal circuits.


==Bonus Information ==
==Bonus Information ==
-The 4100ES in the Domestic Terminal set an Instagram record for actual troubles, with a whopping 102 troubles! There was one with more troubles, but it had many disabled points, whereas this one did not.
-The 4100ES in the Domestic Terminal set an Instagram record for actual troubles, with a whopping 102 troubles! There was one with more troubles, but it had many disabled points, whereas this one did not.


-This is the only major airport in North America to use bell/strobes for notification appliances.
-This is the only major airport in North America to use bell/strobes for notification appliances.
[[]
[[Category:Calgary]]
[[Category:Airports]]

Latest revision as of 23:14, 22 February 2025

Calgary International Airport, also simply known as YYC Airport is an international airport that serves Calgary. It is located at 2000 Airport Rd NE, Calgary, AB, is the fourth largest airport in Canada, and the largest and busiest airport in Alberta. It was built in the late 1930s, and the Domestic terminal was built in 1977, and the International terminal was built in 2016.

The International terminal has the original fire alarm system, and the Domestic terminal's system was installed in the early to mid 2000s; Concourse D was opened in 2002, and concourses B and C were renovated in 2005.

System Specifications (International Terminal)

System Specifications
FACP: Simplex 4100ES
FACP Location: Near In-Terminal Marriott Hotel (Main Node)
System Type: Two-Stage Networked Addressable
System Line Voltage: 120VAC
NAC Voltage: 70.7VRMS (audible)
24VDC (visuals)
System Coding: Unknown
Strobes Synchronized: Yes, SmartSync
Date of last known Upgrade: N/A
Year Opened: 2016

FACP

This terminal is protected by a Simplex 4120 networked fire alarm system. All nodes are Simplex 4100ES addressable panels, the main node is located somewhere near the in-terminal Marriott hotel according to an airport safety plan. The system runs Simplex's IDNet addressable protocol, and is equipped with voice-evacuation. The system is configured for two-stage operation. The tones and messages are unknown at this time.

Notification Appliances

All of the notification appliances are from Simplex's "TrueAlert" line of products.

Most notification appliances are Simplex 4906-9153 speaker/strobes (white, wall-mount, set to 15cd).

Some areas have Simplex 4906-9157 speaker/strobes (white, ceiling-mount, set to 15cd).

In areas where more sound coverage is needed, there are Simplex 4902-9721CA remote speakers (white, ceiling-mount), and Simplex 4902-9717CA remote speakers (white, wall-mount).

Initiating Devices

Pull Stations

All pull stations are Simplex 4099-9004CA addressable two-stage single-action pull stations.

Automatic Detection Devices

There are Simplex 4098-9714 addressable photoelectric smoke detectors throughout the terminal, mounted on 4098-9792 bases.

Modules

There are Simplex 4090-9001 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

There are Simplex 4090-9002 addressable relay modules serving various purposes.

There are Simplex 4090-9116 isolator modules on the SLCs.

Firefighter's Telephones

There are Simplex 2084-9103 firefighter's telephones on each floor of the airport and networked hotel.

EOLs

There are Simplex 2081-9040C end-of-line resistor plates on all sprinkler and signal circuits.

System Specifications (Domestic Terminal) (2002-present)

System Specifications
FACP: Simplex 4100ES
FACP: CACF Room (Main Node)
System Type: Two-Stage Networked Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: 20BPM (Alert)
Temporal (Alarm)
Strobes Synchronized: Yes, Wheelock
Date of last known Upgrade: 2016
Year Opened: 1977

FACP

This terminal is protected by a Simplex 4120 networked fire alarm system. All nodes are Simplex 4100ES addressable panels. The main panel is located in the CACF room near the former Concourse B security checkpoint, and an auxiliary panel is located in the vestibule of Departures Door 1. The system runs Simplex's IDNet addressable protocol, and is configured for two-stage operation. The alert signal coding is 20BPM, followed by temporal as the evacuation signal.

The 4100ES replaced a Simplex 4100U in 2016 to network to the new terminal; the cabinets were kept.

Notification Appliances

All audible notification appliances are Simplex 2901-9724 motor bells (10" gong). Most are mounted on Wheelock RSSP-2415W strobe plates (red, 15cd). Some bells are mounted remotely, and some bells are mounted on Wheelock RSS-24MCW-FR strobe plates (red, set to 15cd).

The domestic parkade has Simplex 2901-9724 motor bells, with Wheelock RSSWP-2475W-FR weatherproof remote strobes (red, 75cd) mounted underneath them.

The departures area also has Simplex 4904-9105 remote strobes (red, wall-mount, 110cd), mounted on the lowered ceilings of the entry doors.

There is also a Simplex 4904-9103 remote strobe (red, ceiling-mount, 4.75cd), fitted with a 4905-9902 lens (no marking).

The 4904-series strobes were installed in 1995.

Initiating Devices

Pull Stations

All pull stations are Simplex 4099-9004CA addressable two-stage single-action pull stations.

Automatic Detection Devices

There are Simplex 4098-9714 addressable photoelectric smoke detectors in some elevator lobbies, mounted on Simplex 4098-9792 bases.

Modules

There are Simplex 4090-9001 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

There are Simplex 4090-9002 addressable relay modules serving various purposes.

EOLs

There are Simplex 2081-9040C end-of-line resistor plates on all sprinkler and signal circuits.

Bonus Information

-The 4100ES in the Domestic Terminal set an Instagram record for actual troubles, with a whopping 102 troubles! There was one with more troubles, but it had many disabled points, whereas this one did not.

-This is the only major airport in North America to use bell/strobes for notification appliances. [[]