Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Uplands Manor: Difference between revisions

From FireAlarmPedia
Tags: mobile web edit mobile edit
No edit summary
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
'''Uplands Manor''' is a 5 story apartment building in Bankview, SW Calgary. The fire alarm system is another interesting apartment building system utilizing a single 120V circuit with AC bells simply wired in series-parallel with the initiating devices, with no panel in between. (See [[7044 Ogden Road SE]]) The building was constructed in 1969 and the fire alarm system is mostly original, except for the smoke detectors.
{| style="float:right;border:2px solid black"
==System Specifications==
|-
====FACP ====
! System Specifications
This system does not use a panel and the initiating devices are the control point.  
|-
|
|-
| FACP: None (3-wire)<br />System Type: Hardwired <br /> System Line Voltage: 120VAC<br />NAC Voltage: 120VAC <br />Date of last known Upgrade: 2000s <br />Year Opened: 1969
|}
'''Uplands Manor''' is a 5 story apartment building located at 1608 22 Ave SW, Calgary, AB. The building was constructed in 1969 and the fire alarm system is mostly original, except for the smoke detectors.


The fire alarm system is another interesting apartment building system utilizing a single 120V circuit with AC bells simply wired in series-parallel with the initiating devices, with no panel in between.
==System Specifications (1969-present)==
The complex is protected by a hardwired 120V fire alarm system, so there is no panel.
====Notification Appliances====
====Notification Appliances====
The notification appliances are quite rare. They are Edwards 1047 vibrating bells (6" gong, 120VAC). There is one bell per floor, for a total of five. They are original to the building.
All notification appliances are very rare Edwards 1047 vibrating bells (6" gong, 120VAC). There is one bell per floor, for a total of five. They are original to the building.
 
===Initiating Devices===
===Initiating Devices===
====Pull Stations====
====Pull Stations====
The pull stations consist of Edwards 270-SPO (1960s era, classic square E shield, FIRE ALARM at the top) single action pull stations, some of which have their original glass rod. They are likely original to the building. There are two on each floor at either stairwell.
All pull stations are first-generation Edwards 270-SPO single action pull stations, some of which have their original glass rod. They are likely original to the building. There are two on each floor at either stairwell.
 
====Automatic Detection Devices====
====Automatic Detection Devices====
There are a total of twenty American Sensors ESA5011 120v hardwired ionization smoke alarms installed in the building; two on each floor attached to each pull station (10), and one for each floor in the two stairwells. (10)


There are a total of twenty American Sensors ESA5011 120v hardwired ionization smoke alarms installed in the building. Two on each floor attached to each pull station (10), and one for each floor in the two stairwells. (10) It is possible that there is one more in the elevator mechanical room. These were installed later, possibly 2000s-2010s.
It is possible that there is one more in the elevator mechanical room.  


There is also a Mirtone 73330 Heat Detector in the Laundry room near the mechanical room door.
There is also a Mirtone 73330 fixed-temperature heat detector in the Laundry room near the mechanical room door.
[[Category:Facilities]]
[[Category:Residential]]
[[Category:Calgary]]

Latest revision as of 10:29, 28 May 2024

System Specifications
FACP: None (3-wire)
System Type: Hardwired
System Line Voltage: 120VAC
NAC Voltage: 120VAC
Date of last known Upgrade: 2000s
Year Opened: 1969

Uplands Manor is a 5 story apartment building located at 1608 22 Ave SW, Calgary, AB. The building was constructed in 1969 and the fire alarm system is mostly original, except for the smoke detectors.

The fire alarm system is another interesting apartment building system utilizing a single 120V circuit with AC bells simply wired in series-parallel with the initiating devices, with no panel in between.

System Specifications (1969-present)[edit | edit source]

The complex is protected by a hardwired 120V fire alarm system, so there is no panel.

Notification Appliances[edit | edit source]

All notification appliances are very rare Edwards 1047 vibrating bells (6" gong, 120VAC). There is one bell per floor, for a total of five. They are original to the building.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are first-generation Edwards 270-SPO single action pull stations, some of which have their original glass rod. They are likely original to the building. There are two on each floor at either stairwell.

Automatic Detection Devices[edit | edit source]

There are a total of twenty American Sensors ESA5011 120v hardwired ionization smoke alarms installed in the building; two on each floor attached to each pull station (10), and one for each floor in the two stairwells. (10)

It is possible that there is one more in the elevator mechanical room.

There is also a Mirtone 73330 fixed-temperature heat detector in the Laundry room near the mechanical room door.