More actions
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: Yes, | | FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: Yes, System Sensor (MDL) <br />Date of last known Upgrade: 2010s <br />Year Opened: 1979 | ||
|} | |} | ||
'''The Forest Lawn Community & Neighborhood Services''' is a building providing | '''The Forest Lawn Community & Neighborhood Services''' is a building providing community social-development services and youth-justice probation, located at 3810 17 Ave SE, Calgary, AB. It was built in 1979, and the fire alarm system was upgraded in the 2010s. | ||
== System Specifications (2010s-present) == | == System Specifications (2010s-present) == | ||
==== FACP ==== | ==== FACP ==== | ||
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal. | The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal. | ||
==== Notification Appliances ==== | ==== Notification Appliances ==== | ||
All notification appliances are from System Sensor’s “SpectrAlert Advance” line of products. <br> There is a mix of System Sensor P2RA horn/strobes (red, wall-mount, set to 15cd) and System Sensor PC2RA horn/strobes (red, ceiling-mount, set to 15cd). | All notification appliances are from System Sensor’s “SpectrAlert Advance” line of products. <br>There is a mix of System Sensor P2RA horn/strobes (red, wall-mount, set to 15cd) and System Sensor PC2RA horn/strobes (red, ceiling-mount, set to 15cd). | ||
=== Initiating Devices === | === Initiating Devices === | ||
==== Pull Stations ==== | ==== Pull Stations ==== | ||
All pull stations are Mircom MS-401AD addressable single-action pull stations. | All pull stations are Mircom MS-401AD addressable single-action pull stations. | ||
==== Automatic Detection Devices ==== | ==== Automatic Detection Devices ==== | ||
There are Mircom MIX-2251BA addressable photoelectric smoke detectors, mounted on System Sensor B210LPA bases. <br> There are also Mircom MIX-5351RBA addressable thermal heat detectors installed on System Sensor B300A-6 bases in some areas. | There are Mircom MIX-2251BA addressable photoelectric smoke detectors, mounted on System Sensor B210LPA bases. <br>There are also Mircom MIX-5351RBA addressable thermal heat detectors installed on System Sensor B300A-6 bases in some areas. | ||
==== Modules ==== | ==== Modules ==== | ||
There are System Sensor M500XA isolator modules on the | There are System Sensor M500XA isolator modules on the SLCs. <br>There is a System Sensor MDL synchronization module to synchronize the horn/strobes. | ||
==== EOLs ==== | |||
There are Mircom MP-300 end of line resistor plates on all signal circuits. | |||
[[Category:Calgary]] | [[Category:Calgary]] | ||
[[Category:Commercial]] | [[Category:Commercial]] | ||
Latest revision as of 20:41, 27 September 2024
| System Specifications |
|---|
| FACP: Mircom FX-2000 FACP Location: Main Entrance Vestibule System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, System Sensor (MDL) Date of last known Upgrade: 2010s Year Opened: 1979 |
The Forest Lawn Community & Neighborhood Services is a building providing community social-development services and youth-justice probation, located at 3810 17 Ave SE, Calgary, AB. It was built in 1979, and the fire alarm system was upgraded in the 2010s.
System Specifications (2010s-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.
Notification Appliances[edit | edit source]
All notification appliances are from System Sensor’s “SpectrAlert Advance” line of products.
There is a mix of System Sensor P2RA horn/strobes (red, wall-mount, set to 15cd) and System Sensor PC2RA horn/strobes (red, ceiling-mount, set to 15cd).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations are Mircom MS-401AD addressable single-action pull stations.
Automatic Detection Devices[edit | edit source]
There are Mircom MIX-2251BA addressable photoelectric smoke detectors, mounted on System Sensor B210LPA bases.
There are also Mircom MIX-5351RBA addressable thermal heat detectors installed on System Sensor B300A-6 bases in some areas.
Modules[edit | edit source]
There are System Sensor M500XA isolator modules on the SLCs.
There is a System Sensor MDL synchronization module to synchronize the horn/strobes.
EOLs[edit | edit source]
There are Mircom MP-300 end of line resistor plates on all signal circuits.