Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Mission Centre: Difference between revisions

From FireAlarmPedia
No edit summary
No edit summary
 
(One intermediate revision by the same user not shown)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Kidde VS4 <br /> FACP Location: Parkade Fire Alarm Room <br />System Type: Hybrid <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: Yes, Genesis <br />Date of last known Upgrade: 2021 <br />Year Opened: 1974
| FACP: Kidde VS4 <br />FACP Location: Parkade Fire Alarm Room <br />System Type: Single-Stage Hybrid-Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: Yes, Genesis <br />Date of last known Upgrade: 2021 <br />Year Opened: 1974
|}
|}
'''Mission Centre''' is an office tower located at 2303 4 Street Southwest, in Calgary, Alberta, Canada. The building opened in 1974, and the fire alarm system was upgraded in 2021.
'''Mission Centre''' is an office tower located at 2303 4 St SW, in Calgary, Alberta, Canada. The building opened in 1974, and the fire alarm system was upgraded in 2021.
==System Specifications (2021-present)==
==System Specifications (2021-present)==
====FACP====
====FACP====
The building is protected by a Kidde VS4 hybrid-addressable fire alarm system. The panel is located in the parkade electrical room. The system runs Kidde’s GSA addressable protocol, and the system coding is temporal.
The building is protected by a Kidde VS4 hybrid-addressable fire alarm system. The panel is located in the parkade fire alarm room. The system runs Kidde’s GSA addressable protocol, and the system coding is temporal.
=====Annunciators=====
=====Annunciators=====
There is a Kidde K-RLCD-C annunciator paired with a Kidde K-RLED24 annunciator behind the security desk. Both annunciators are mounted in a Kidde RA-ENC2 annunciator enclosure.
There is a Kidde K-RLCD-C annunciator paired with a Kidde K-RLED24 annunciator behind the security desk. Both annunciators are mounted in a Kidde RA-ENC2 annunciator enclosure.
Line 20: Line 20:
====Automatic Detection Devices====
====Automatic Detection Devices====
There are Kidde KI-PD addressable photoelectric smoke detectors throughout the building, mounted on Kidde KI-SB bases. The parkade has FDD CF-135 conventional 135°F fixed-temperature heat detectors.
There are Kidde KI-PD addressable photoelectric smoke detectors throughout the building, mounted on Kidde KI-SB bases. The parkade has FDD CF-135 conventional 135°F fixed-temperature heat detectors.
==== EOLs ====
There are Edwards EOL-P1 end of line resistor plates on all signal circuits.
[[Category:Calgary]]
[[Category:Calgary]]
[[Category:Commercial]]
[[Category:Commercial]]

Latest revision as of 14:16, 13 October 2024

System Specifications
FACP: Kidde VS4
FACP Location: Parkade Fire Alarm Room
System Type: Single-Stage Hybrid-Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2021
Year Opened: 1974

Mission Centre is an office tower located at 2303 4 St SW, in Calgary, Alberta, Canada. The building opened in 1974, and the fire alarm system was upgraded in 2021.

System Specifications (2021-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Kidde VS4 hybrid-addressable fire alarm system. The panel is located in the parkade fire alarm room. The system runs Kidde’s GSA addressable protocol, and the system coding is temporal.

Annunciators[edit | edit source]

There is a Kidde K-RLCD-C annunciator paired with a Kidde K-RLED24 annunciator behind the security desk. Both annunciators are mounted in a Kidde RA-ENC2 annunciator enclosure.

Notification Appliances[edit | edit source]

All notification appliances are Edwards “Genesis” G1AVRF horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

Most pull stations are Vigilant GSA-M270 addressable single-action pull stations. Some areas have Mircom MS-401 conventional single-action pull stations, remaining from the previous system.

Automatic Detection Devices[edit | edit source]

There are Kidde KI-PD addressable photoelectric smoke detectors throughout the building, mounted on Kidde KI-SB bases. The parkade has FDD CF-135 conventional 135°F fixed-temperature heat detectors.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all signal circuits.