Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Banff Gondola (main building): Difference between revisions

From FireAlarmPedia
(Redid the page, and added a new section: Recent Replacements.)
(Page tweaked to fit modern format.)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Custom Notifier NFS2-3030C <br />System Type: Hybrid <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />Date of last known Upgrade: 2016 <br />Year Opened: 1997/1998
| FACP: Notifier NFS2-640C <br />System Type: Conventional<br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC  
System Coding: Continuous?
 
Strobes Synchronized: Yes<br />Date of last known Upgrade: 2016 <br />Year Opened: 1997/1998
|}
|}
'''Banff Gondola''' is a tourist attraction in Banff, AB. It is a gondola ride on Sulphur Mountain with an amazing view. The main building is from 1997-98, but has had the current system since 2016, though all initiating devices amd most notification appliances are original. This page covers the main building. For the upper terminal, see [[Banff Gondola Upper Terminal]].
'''Banff Gondola''' is a tourist attraction in Banff, AB. It is a gondola ride on Sulphur Mountain with an amazing view. The main building is from 1997-98, but has had the current system since 2016, though all initiating devices amd most notification appliances are original. This page covers the main building. For the upper terminal, see [[Banff Gondola Upper Terminal]].
== System Specifications ==
== System Specifications ==
==== FACP ====
==== FACP ====
The building is protected by a Notifier NFS2-640C conventional fire alarm system. The panel is located in the Starbucks, next to an emergency exit and near a fireplace. The panel has two zone cards in it; a Notifier XP6-MA 6-zone smoke detector card, as well as a Notifier XP-10MA 10-zone card. The system likely does continuous in alarm.  This panel replaced an EST 6616.  
The building is protected by a Notifier NFS2-640C conventional fire alarm system. The panel is located in the Starbucks, next to an emergency exit and near a fireplace. The panel has two zone cards in it; a Notifier XP6-MA 6-zone smoke detector card, as well as a Notifier XP-10MA 10-zone card. The system coding is likely continuous.  This panel replaced an Edwards 6616.  
==== Notification Appliances ====
==== Notification Appliances ====
Most notification appliances are Edwards 439D-6AWC vibrating bells (6" gong). These can be found in three different setups: Remotely, with no strobe, on an Edwards 403-5A-R strobe plate (15cd), and with an Edwards 202-5A-T remote strobe (15cd) next to it. By the main entrance, there is an Edwards MB6-24 motor bell (6" gong), likely replacing a 439D-6AWC. Some areas have Edwards 202-5A-T remote strobes, and the gondola boarding area has an Edwards 439D-10AWC vibrating bell (10" gong), with a 202-5A-T strobe next to it.
Most notification appliances are Edwards 439D-6AWC vibrating bells (6" gong). These can be found in three different setups: Remotely, with no strobe, on an Edwards 403-5A-R strobe plate (15cd), and with an Edwards 202-5A-T remote strobe (15cd) next to it. By the main entrance, there is an Edwards MB6-24 motor bell (6" gong) as a deficiency replacement. Some areas have Edwards 202-5A-T remote strobes, and the gondola boarding area has an Edwards 439D-10AWC vibrating bell (10" gong), with a 202-5A-T strobe next to it.  
=== Initiating Devices ===
=== Initiating Devices ===
==== Pull Stations ====
==== Pull Stations ====
Line 18: Line 21:
==== Automatic Detection Devices ====
==== Automatic Detection Devices ====
There are Edwards EDW1451A ionization smoke detectors throughout the building, as well as some System Sensor 5601A 135-degree fixed/rate-of-rise heat detectors in the main lobby, restrooms, and other areas.
There are Edwards EDW1451A ionization smoke detectors throughout the building, as well as some System Sensor 5601A 135-degree fixed/rate-of-rise heat detectors in the main lobby, restrooms, and other areas.
== Recent Replacements ==
== Recent Replacements ==
In 2021, the Edwards 280B-PL heat detectors were replaced with System Sensor 5601A heat detectors, due to a recall affecting the Edwards detectors.
In 2021, the Edwards 280B-PL heat detectors were replaced with System Sensor 5601A heat detectors, due to a recall affecting the Edwards detectors.
[[Category:Facilities]]
[[Category:Facilities]]

Revision as of 11:22, 15 November 2022

System Specifications
FACP: Notifier NFS2-640C
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC

System Coding: Continuous?

Strobes Synchronized: Yes
Date of last known Upgrade: 2016
Year Opened: 1997/1998

Banff Gondola is a tourist attraction in Banff, AB. It is a gondola ride on Sulphur Mountain with an amazing view. The main building is from 1997-98, but has had the current system since 2016, though all initiating devices amd most notification appliances are original. This page covers the main building. For the upper terminal, see Banff Gondola Upper Terminal.

System Specifications

FACP

The building is protected by a Notifier NFS2-640C conventional fire alarm system. The panel is located in the Starbucks, next to an emergency exit and near a fireplace. The panel has two zone cards in it; a Notifier XP6-MA 6-zone smoke detector card, as well as a Notifier XP-10MA 10-zone card. The system coding is likely continuous. This panel replaced an Edwards 6616.

Notification Appliances

Most notification appliances are Edwards 439D-6AWC vibrating bells (6" gong). These can be found in three different setups: Remotely, with no strobe, on an Edwards 403-5A-R strobe plate (15cd), and with an Edwards 202-5A-T remote strobe (15cd) next to it. By the main entrance, there is an Edwards MB6-24 motor bell (6" gong) as a deficiency replacement. Some areas have Edwards 202-5A-T remote strobes, and the gondola boarding area has an Edwards 439D-10AWC vibrating bell (10" gong), with a 202-5A-T strobe next to it.

Initiating Devices

Pull Stations

All pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices

There are Edwards EDW1451A ionization smoke detectors throughout the building, as well as some System Sensor 5601A 135-degree fixed/rate-of-rise heat detectors in the main lobby, restrooms, and other areas.

Recent Replacements

In 2021, the Edwards 280B-PL heat detectors were replaced with System Sensor 5601A heat detectors, due to a recall affecting the Edwards detectors.