Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Safeway (Shawnessy): Difference between revisions

From FireAlarmPedia
(→‎Notification Appliances: fixing an error. the bells were never used on the 4007ES.)
Line 25: Line 25:


==== Notification Appliances ====
==== Notification Appliances ====
The original notification appliances were Edwards 439D-10AWC vibrating bells, original from 1996. <br> Fun fact: One of the fire bells was wired to a doorbell as well as the 6616, and would ring softly to indicate a delivery. Possibly it was on 12VDC. It is unknown if the horn/strobe there goes off for deliveries, but it's in the same place as the bell that was there.
The original notification appliances were Edwards 439D-10AWC vibrating bells. These were replaced in 2017 with Simplex TrueAlert horn/strobes.


=== Initiating Devices ===
=== Initiating Devices ===

Revision as of 15:55, 16 March 2021

Safeway is a chain of grocery stores in North America. This particular location is located in Shawnessy, SE Calgary and was built in 1996. The current fire alarm system is from 2017, but all pull stations are original.

System Specifications

FACP

The fire alarm panel is a Simplex 4007ES. It was installed in 2017, and it is set up in a non-addressable manner. The main panel is located in the main entrance. The 4007ES replaced an EST 6616.

Notification Appliances

The notification appliances consist of Simplex TrueAlert 4906-9127 (red, wall) horn/strobes. These were installed in 2017, replacing the original bells. It is unknown if the horn/strobe replacing the bell that rang for a delivery goes off for one, but it is in the same place that the bell was.

Initiating Devices

Pull Stations

The pull stations are Edwards 270-SPO, from 1996. They are original to the store.

Automatic Detection Devices

None noticed.

Previous System Specifications

FACP

The original fire alarm panel was an EST 6616 from 1996. It was replaced in 2017 with the current Simplex 4007ES.

Notification Appliances

The original notification appliances were Edwards 439D-10AWC vibrating bells. These were replaced in 2017 with Simplex TrueAlert horn/strobes.

Initiating Devices

Pull Stations

The pull stations were and still are Edwards 270-SPO. These are the only devices that were continued to be used on the new 4007ES.

Automatic Detection Devices

None were noticed.