More actions
No edit summary |
|||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Continuous <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2010s <br />Year Opened: 1970 | | FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Continuous <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2010s <br />Year Opened: 1970 | ||
|} | |} | ||
'''Bob Bahan Aquatic & Fitness Centre''' is a now closed swimming pool & fitness centre located at 4812 14 Ave SE, Calgary, AB. It is owned and operated by the City of Calgary. The facility was built in 1970, and underwent a major renovation between 1999 and 2000. The fire alarm system was upgraded in 2000, and again in 2006. | '''Bob Bahan Aquatic & Fitness Centre''' is a now closed swimming pool & fitness centre located at 4812 14 Ave SE, Calgary, AB. It is owned and operated by the City of Calgary. The facility was built in 1970, and underwent a major renovation between 1999 and 2000. The fire alarm system was upgraded in 2000, and again in 2006. | ||
| Line 16: | Line 16: | ||
==== Pull Stations ==== | ==== Pull Stations ==== | ||
Most pull stations are Simplex 2099-9795 addressable single-action pull stations, converted to conventional. <br> There is an Edwards 270-SPOW conventional single-action pull station in the pool area. <br> There is a Fire-Lite MPS-950BF conventional pull station at the main entrance as a deficiency replacement. <br> All above pull stations are wired to Mircom MIX-M501MA addressable monitor modules. <br> There is a Mircom MS-401AP addressable single-action pull station at the east exit as a deficiency replacement. | Most pull stations are Simplex 2099-9795 addressable single-action pull stations, converted to conventional. <br> There is an Edwards 270-SPOW conventional single-action pull station in the pool area. <br> There is a Fire-Lite MPS-950BF conventional pull station at the main entrance as a deficiency replacement. <br> All above pull stations are wired to Mircom MIX-M501MA addressable monitor modules. <br> There is a Mircom MS-401AP addressable single-action pull station at the east exit as a deficiency replacement. | ||
==== Automatic Detection Devices ==== | |||
There are Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell. <br>There are Mircom MIX-2251RBA addressable 135°F fixed temperature heat detectors throughout the building. <br>In areas with higher ambient temperatures, there are Mircom MIX-5251HBA addressable 135°F fixed temperature heat detectors <br>All above detectors are mounted on System Sensor B710LPA bases. <br>There is a Mircom MIX-5351RAPA addressable 135°F fixed-temperature/rate of rise heat detector in the mechanical room, mounted on a System Sensor B300A-6 base as a deficiency replacement. | |||
==== | ==== EOLs ==== | ||
There are Mircom | There are Mircom MP-300 end of line resistor plates on all signal circuits. | ||
[[Category:Calgary]] | [[Category:Calgary]] | ||
[[Category:Swimming Pools]] | [[Category:Swimming Pools]] | ||
[[Category:Recreation Centres]] | [[Category:Recreation Centres]] | ||
Latest revision as of 15:44, 8 September 2024
| System Specifications |
|---|
| FACP: Mircom FX-2000 FACP Location: Main Entrance Vestibule System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Continuous Strobes Synchronized: No Date of last known Upgrade: 2010s Year Opened: 1970 |
Bob Bahan Aquatic & Fitness Centre is a now closed swimming pool & fitness centre located at 4812 14 Ave SE, Calgary, AB. It is owned and operated by the City of Calgary. The facility was built in 1970, and underwent a major renovation between 1999 and 2000. The fire alarm system was upgraded in 2000, and again in 2006.
System Specifications (2006-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is continuous.
The FX-2000 replaced a Simplex 4020 as part of an upgrade project for select buildings.
Notification Appliances[edit | edit source]
Most notification appliances are Simplex 2901-9723 motor bells (6” gong) mounted on Wheelock RSSP-2415W-FR strobe plates (red, 15cd).
There are Mircom BL-10B motor bells (10” gong) mounted on Wheelock RSSP-24MCW-FR strobe plates (red, set to 15cd) as deficiency replacements in some areas.
There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an EST “Integrity” 403-5A-R strobe plate (15cd) in the basement mechanical room, also a deficiency replacement.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
Most pull stations are Simplex 2099-9795 addressable single-action pull stations, converted to conventional.
There is an Edwards 270-SPOW conventional single-action pull station in the pool area.
There is a Fire-Lite MPS-950BF conventional pull station at the main entrance as a deficiency replacement.
All above pull stations are wired to Mircom MIX-M501MA addressable monitor modules.
There is a Mircom MS-401AP addressable single-action pull station at the east exit as a deficiency replacement.
Automatic Detection Devices[edit | edit source]
There are Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell.
There are Mircom MIX-2251RBA addressable 135°F fixed temperature heat detectors throughout the building.
In areas with higher ambient temperatures, there are Mircom MIX-5251HBA addressable 135°F fixed temperature heat detectors
All above detectors are mounted on System Sensor B710LPA bases.
There is a Mircom MIX-5351RAPA addressable 135°F fixed-temperature/rate of rise heat detector in the mechanical room, mounted on a System Sensor B300A-6 base as a deficiency replacement.
EOLs[edit | edit source]
There are Mircom MP-300 end of line resistor plates on all signal circuits.