Forest Lawn Community & Neighborhood Services: Difference between revisions

Latest revision as of 14:11, 9 January 2025

System Specifications

FACP: Mircom FX-2000 FACP Location: Main Entrance Vestibule System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, System Sensor (MDL) Date of last known Upgrade: 2015 Year Opened: 1979

The Forest Lawn Community & Neighborhood Services is a building providing community social-development services and youth-justice probation, located at 3810 17 Ave SE, Calgary, AB. It was built in 1979, and the fire alarm system was upgraded in 2015.

System Specifications (2015-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

Most notification appliances are System Sensor "SpectrAlert Advance" PC2RA horn/strobes (red, ceiling-mount, set to 15cd.)

Some areas have System Sensor P2RA horn/strobes (red, wall-mount, set to 15cd).

For outdoor notification, there is a System Sensor SCRKA weatherproof remote strobe (red, ceiling-mount) outside the main entrance.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Mircom MIX-2251APA addressable photoelectric smoke detectors at the top of each stairwell, mounted on System Sensor B200SRA sounder bases.

There are Mircom MIX-5251RAPA addressable 135°F fixed-temperature/rate-of-rise heat detectors in most rooms.

There are Mircom MIX-5251APA addressable 135°F fixed-temperature heat detectors in the first floor washrooms.

All heat detectors are mounted on System Sensor B210LPA bases.

Modules[edit | edit source]

There are Mircom MIX-M500RAPA addressable relay modules for HVAC shutdown and BMS signal.

There are System Sensor M500XA isolator modules on the SLC.
There is a System Sensor MDL synchronization module to synchronize the horn/strobes.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all signal circuits.

@@ Line 5: / Line 5: @@
 |
 |-
-| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: Yes, System Sensor (MDL) <br />Date of last known Upgrade: 2010s <br />Year Opened: 1979
+| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: Yes, System Sensor (MDL) <br />Date of last known Upgrade: 2015<br />Year Opened: 1979
 |}
-'''The Forest Lawn Community & Neighborhood Services''' is a building providing community social-development services and youth-justice probation, located at 3810 17 Ave SE, Calgary, AB. It was built in 1979, and the fire alarm system was upgraded in the 2010s.
+'''The Forest Lawn Community & Neighborhood Services''' is a building providing community social-development services and youth-justice probation, located at 3810 17 Ave SE, Calgary, AB. It was built in 1979, and the fire alarm system was upgraded in 2015.
-== System Specifications (2010s-present) ==
+== System Specifications (2015-present) ==
 ==== FACP ====
 The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.
 ==== Notification Appliances ====
-All notification appliances are from System Sensor’s “SpectrAlert Advance” line of products. <br>There is a mix of System Sensor P2RA horn/strobes (red, wall-mount, set to 15cd) and System Sensor PC2RA horn/strobes (red, ceiling-mount, set to 15cd).
+Most notification appliances are System Sensor "SpectrAlert Advance" PC2RA horn/strobes (red, ceiling-mount, set to 15cd.)
+Some areas have System Sensor P2RA horn/strobes (red, wall-mount, set to 15cd).
+For outdoor notification, there is a System Sensor SCRKA weatherproof remote strobe (red, ceiling-mount) outside the main entrance.
 === Initiating Devices ===
 ==== Pull Stations ====
 All pull stations are Mircom MS-401AD addressable single-action pull stations.
 ==== Automatic Detection Devices ====
-There are Mircom MIX-2251BA addressable photoelectric smoke detectors, mounted on System Sensor B210LPA bases. <br>There are also Mircom MIX-5351RBA addressable thermal heat detectors installed on System Sensor B300A-6 bases in some areas.
+There are Mircom MIX-2251APA addressable photoelectric smoke detectors at the top of each stairwell, mounted on System Sensor B200SRA sounder bases.
+There are Mircom MIX-5251RAPA addressable 135°F fixed-temperature/rate-of-rise heat detectors in most rooms.
+There are Mircom MIX-5251APA addressable 135°F fixed-temperature heat detectors in the first floor washrooms.
+All heat detectors are mounted on System Sensor B210LPA bases.
 ==== Modules ====
-There are System Sensor M500XA isolator modules on the SLCs. <br>There is a System Sensor MDL synchronization module to synchronize the horn/strobes.
+There are Mircom MIX-M500RAPA addressable relay modules for HVAC shutdown and BMS signal.
+There are System Sensor M500XA isolator modules on the SLC. <br>There is a System Sensor MDL synchronization module to synchronize the horn/strobes.
 ==== EOLs ====
 There are Mircom MP-300 end of line resistor plates on all signal circuits.
 [[Category:Calgary]]
 [[Category:Commercial]]