More actions
| System Specifications |
|---|
| FACP: Mircom FX-2000 FACP Location: Main Entrance Vestibule System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, System Sensor (MDL) Date of last known Upgrade: 2015 Year Opened: 1979 |
The Forest Lawn Community & Neighborhood Services is a building providing community social-development services and youth-justice probation, located at 3810 17 Ave SE, Calgary, AB. It was built in 1979, and the fire alarm system was upgraded in 2015.
System Specifications (2015-present)
FACP
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.
Notification Appliances
Most notification appliances are System Sensor "SpectrAlert Advance" PC2RA horn/strobes (red, ceiling-mount, set to 15cd.)
Some areas have System Sensor P2RA horn/strobes (red, wall-mount, set to 15cd).
For outdoor notification, there is a System Sensor SCRKA weatherproof remote strobe (red, ceiling-mount) outside the main entrance.
Initiating Devices
Pull Stations
All pull stations are Mircom MS-401AD addressable single-action pull stations.
Automatic Detection Devices
There are Mircom MIX-2251APA addressable photoelectric smoke detectors at the top of each stairwell, mounted on System Sensor B200SRA sounder bases.
There are Mircom MIX-5251RAPA addressable 135°F fixed-temperature/rate-of-rise heat detectors in most rooms.
There are Mircom MIX-5251APA addressable 135°F fixed-temperature heat detectors in the first floor washrooms.
All heat detectors are mounted on System Sensor B210LPA bases.
Modules
There are Mircom MIX-M500RAPA addressable relay modules for HVAC shutdown and BMS signal.
There are System Sensor M500XA isolator modules on the SLC.
There is a System Sensor MDL synchronization module to synchronize the horn/strobes.
EOLs
There are Mircom MP-300 end of line resistor plates on all signal circuits.