More actions
| System Specifications |
|---|
|
| FACP: N/A (Hardwired)
System Line Voltage: 120VAC NAC Voltage:120VAC Date of last known Upgrade: 2000s Year Opened: 1959 |
The Kildare is a 2 story + basement apartment building located in the Beltline district of Calgary, AB. It was built in 1959, however the system is not original.
System Specifications
FACP
The complex is protected by a 3-wire, 120V Hardwired fire alarm system, meaning that there is no panel therefore the system coding is continuous.
Notification Appliances
The notification appliances consist of Edwards "Durabel" 6000D (6-inch) 120VAC vibrating bells. Installed sometime in the 1960s at the earliest, and the early 1970s at the latest.
Initiating Devices
Pull Stations
The pull stations are mostly Edwards 270-SPO single action pull stations, with one Edwards 270-GAO two-stage pull station, which was likely in the truck at the time of installation despite not being two-stage. There is also a newer Mircom MS-401 likely installed sometime in the 2000s as a deficiency replacement.
Automatic Detection Devices
As with most 120VAC apartment systems, this one has American Sensor ESA5011 120V hardwired smoke detectors with an internal relay.