More actions
| System Specifications |
|---|
| FACP: EST QuickStart QS1
FACP Location: Marshalls Entrance System Coding: Temporal Strobes Synchronized: Yes |
50 4307 130 Avenue SE is the address of a plaza in the South Trail Crossing shopping area of Calgary, Alberta, Canada. The building currently consists of two tenants: Marshalls and HomeSense. The building originally opened in 1999 as a Calgary Co-op grocery store, and was converted to its current state in 2015. The fire alarm system was installed following the 2015 renovation.
System Specifications
FACP
The building is protected by an EST QuickStart QS1 addressable fire alarm system. The panel is located in the Marshalls main entrance vestibule. The system runs EST's Signature-series addressable protocol, and the system coding is temporal.
Notification Appliances
The exterior walls of both stores have EST "Genesis" G1R-HDVM horn/strobes (red, wall-mount, no lettering, set to 15cd).
Areas not near walls have EST GC-HDVM horn/strobes (white, ceiling-mount, no lettering, set to 15cd).
The public washrooms have EST G1R-VM remote strobes (red, wall-mount, no lettering, set to 15cd).
Initiating Devices
Pull Stations
All pull stations are EST SIGA-270 addressable single-action pull stations.
Automatic Detection Devices
None noticed, as all public areas have sprinkler coverage.
Modules
There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.
Former System Specifications (Co-op)
| System Specifications |
|---|
| FACP: Notifier AFP-200
FACP Location: Main Entrance System Coding: Temporal Strobes Synchronized: No |
FACP
The store was protected by a Notifier AFP-200 addressable fire alarm system. The panel was located in the main entrance vestibule. The system ran Notifier's CLIP addressable protocol, and the system coding was temporal.
Notification Appliances
All notification appliances were System Sensor "SpectrAlert" P2415A horn/strobes (red, wall-mount, 15cd). They were likely set to the electromechanical tone.
Initiating Devices
Pull Stations
All pull stations were Notifier NFM-950B single-action pull stations. All pull stations were wired to Notifier MMX-101A addressable monitor modules, located directly behind each station.
Automatic Detection Devices
None noticed, as all public areas had sprinkler coverage.
Modules
There were Notifier MMX-1A addressable monitor modules supervising the sprinkler system's tamper and flow switches.