Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

The Kildare

From FireAlarmPedia
Revision as of 23:38, 27 May 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: N/A (Hardwired)



System Type: Hardwired

System Line Voltage: 120VAC

NAC Voltage:120VAC

Date of last known Upgrade: 2000s

Year Opened: 1959

The Kildare is a 2 story walkup + basement apartment building located in at 740 15 Ave SW, Calgary, AB. It was built in 1959, the system is not original.

System Specifications

FACP

The complex is protected by a 3-wire, 120V Hardwired fire alarm system, meaning that there is no panel therefore the system coding is continuous.

Notification Appliances

The notification appliances consist of Edwards "Durabel" 6000D (6" gong) 120VAC vibrating bells. These were installed sometime in the 1960s at the earliest, and the early 1970s at the latest.

Initiating Devices

Pull Stations

The pull stations are mostly Edwards 270-SPO single action pull stations, with one Edwards 270-GAO two-stage pull station, which was likely in the truck at the time of installation despite not being two-stage. There is also a newer Mircom MS-401 likely installed sometime in the 2000s as a deficiency replacement.

Automatic Detection Devices

As with most 120VAC apartment systems, this one has American Sensor ESA5011 120V hardwired smoke detectors with an internal relay.