Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Uplands Manor

From FireAlarmPedia
System Specifications
FACP: None (Hardwired)
System Type: Hardwired
System Line Voltage: 120VAC
NAC Voltage: 120VAC
Date of last known Upgrade: 2000s
Year Opened: 1969

Uplands Manor is a 5 story apartment building in Bankview, SW Calgary. The fire alarm system is another interesting apartment building system utilizing a single 120V circuit with AC bells simply wired in series-parallel with the initiating devices, with no panel in between. (See 7044 Ogden Road SE) The building was constructed in 1969 and the fire alarm system is mostly original, except for the smoke detectors.

System Specifications

FACP

This system does not use a panel and the initiating devices are the control point.

Notification Appliances

The notification appliances are quite rare. They are Edwards 1047 vibrating bells (6" gong, 120VAC). There is one bell per floor, for a total of five. They are original to the building.

Initiating Devices

Pull Stations

The pull stations consist of Edwards 270-SPO (1960s era, classic square E shield, FIRE ALARM at the top) single action pull stations, some of which have their original glass rod. They are likely original to the building. There are two on each floor at either stairwell.

Automatic Detection Devices

There are a total of twenty American Sensors ESA5011 120v hardwired ionization smoke alarms installed in the building. Two on each floor attached to each pull station (10), and one for each floor in the two stairwells. (10) It is possible that there is one more in the elevator mechanical room. These were installed later, possibly 2000s-2010s.

There is also a Mirtone 73330 Heat Detector in the Laundry room near the mechanical room door.