Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Heritage Park (Stony Plain)

From FireAlarmPedia
Revision as of 10:40, 30 September 2024 by TwentyThree33 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: EST QuickStart QS4
FACP Location: Unknown
System Type: Two-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: 20BPM (Alert)
Temporal (Alarm)
Strobes Synchronized: Yes, EST Self-Sync
Date of last known Upgrade: N/A
Year Opened: 2003, 2017

Heritage Park is a community centre located at 5100 41 Avenue, in Stony Plain, Alberta, Canada. The centre has two community halls and a pavilion. The building was built in 2003, and expanded in 2017. The fire alarm system is original.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by an EST QuickStart QS4 addressable fire alarm system. The panel location is unknown. The system runs EST’s Signature addressable protocol, and is configured for two-stage operation. The alert coding is 20BPM, and the alarm coding is temporal.

Annunciators[edit | edit source]

There is an EST QSA-1-S annunciator in the main entrance vestibule.

Notification Appliances[edit | edit source]

All indoor notification appliances are Edwards “Genesis” G1-HDVM horn/strobes (white, wall-mount, no marking, set to 15cd).
For outdoor notification, there are Edwards “Integrity” 757-7A-T weather-rated horn/strobes (red, wall-mount, 15/75cd) outside the main entrance and mechanical room, and on the patio.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270P addressable two-stage single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are EST SIGA-PS addressable photoelectric smoke detectors in some areas, mounted on EST SIGA-SB bases.
There are EST SIGA-DH duct detector housings with SIGA-PS heads on all air handling units.

Modules[edit | edit source]

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.