Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

IKEA (Edmonton)

From FireAlarmPedia
Revision as of 12:32, 30 September 2024 by TwentyThree33 (talk | contribs) (→‎Annunciators)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Edwards EST3
FACP Location: Unknown
System Type: Two-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 70VRMS (audible)
24VDC (visual)
System Coding: 20BPM + Message (Alert)
Temporal + Message (Alarm)
Strobes Synchronized: Yes, EST
Date of last known Upgrade: N/A
Year Opened: 2003

IKEA is a large multinational chain of stores primarily selling ready-to-assemble furniture. This particular store is located at 1311 102 St NW, Edmonton, Alberta; it is located in South Edmonton Common. It was built in 2003 to replace the old location. The fire alarm system is original.

System Specifications (2003-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an Edwards EST3 addressable fire alarm system. The panel location is unknown. The system runs Edwards’ Signature addressable protocol, and is equipped with voice-evacuation. The system is also configured for two-stage operation. The alert signal is believed to be a 20BPM tone, followed by the alarm signal, a temporal tone. Both signals have custom messages.

Annunciators[edit | edit source]

There is an EST3-6ANN annunciator in the main entrance vestibule, equipped with a 3-REMICA microphone.

Notification Appliances[edit | edit source]

Most notification appliances are Edwards “Genesis” G4F-S7VM speaker/strobes (white, wall-mount, FIRE lettering, 70V).

The washrooms have Edwards GC-S7VM speaker/strobes (white, ceiling-mount, no marking, 70V).

All speaker/strobes are all set to 1 watt and 15cd.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270P addressable two-stage pull stations.

Automatic Detection Devices[edit | edit source]

There are EST SIGA-PS addressable photoelectric smoke detectors located throughout, mounted on SIGA-SB bases.

The air handling units have EST SIGA-DH duct detector housings with SIGA-PS addressable photoelectric heads.

Modules[edit | edit source]

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

There are also EST SIGA-CR relays serving various purposes.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistors on all sprinkler and signal circuits.