Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Inglewood 1410

From FireAlarmPedia
Revision as of 17:46, 12 January 2025 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: Yes, Mircom <br />Date of last known Upgrade: N/A <br />Year Opened: 2014 |} '''Inglewood 1410''' is a condo building located at 1410 9 Ave SE, Calgary, Alberta. I...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-2000
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Mircom
Date of last known Upgrade: N/A
Year Opened: 2014


Inglewood 1410 is a condo building located at 1410 9 Ave SE, Calgary, Alberta. It was built in 2014, and the fire alarm system is original.

System Specifications

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances

The common areas of the building have Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to broadband/15cd).
The bedrooms of the suites have Mircom MH-S25WA silenceable mini-horns (white, wall-mount).

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices

There are Mircom MIX-2251APA addressable photoelectric smoke detectors throughout the building’s common areas, mounted on System Sensor B210LPA bases.

Modules

There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system's tamper and flow switches.
There are Mircom MIX-M500RAPA addressable relay modules serving various purposes.
There is a Mircom SDM-240 sync module on the signal circuit.
There are System Sensor M500XA isolator modules on each SLC.

EOLs

There are Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.