Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Avenida Village Building B

From FireAlarmPedia
Revision as of 15:09, 19 January 2025 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Notifier NFS-320C <br />FACP Location: Main Electrical Room <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Temporal <br>Strobes Synchronized: Yes, System Sensor <br />Date of last known Upgrade: 2021 <br />Year Opened: 1988 |} '''Avenida Village''' is an open-air shopping centre in Calgary, Alberta, Canada....")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier NFS-320C
FACP Location: Main Electrical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: 2021
Year Opened: 1988

Avenida Village is an open-air shopping centre in Calgary, Alberta, Canada. This page will cover Building B, located at 12100 Macleod Trail. The building was built in 1988, and was renovated to house a farmer’s market in 2020. The fire alarm system was fully upgraded in 2021.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in the main electrical room, on the east side of the building. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.

Power Supplies[edit | edit source]

There is a Notifier ACPS-610 10-amp booster power supply located next to the main FACP.

Notification Appliances[edit | edit source]

All indoor notification appliances are System Sensor “L-Series” P2RLA horn/strobes (red, wall-mount, bilingual lettering).
For outdoor notification, there is a System Sensor “SpectrAlert Advance” SRKA weatherproof remote strobe (red, wall-mount) outside the main electrical room.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Notifier NBG-12LX addressable dual-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Notifier FST-851A addressable 135°F fixed-temperature heat detectors in the mechanical and electrical rooms, mounted on System Sensor B210LPA bases.

Modules[edit | edit source]

There are Notifier FMM-1A addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Notifier FRM-1A addressable relay modules serving various purposes.
There are Notifier ISO-XA isolator modules on the SLC.

EOLs[edit | edit source]

There are Notifier EOL-CR end of line resistor plates on all sprinkler and signal circuits.