Toggle search
Toggle menu
141
57
50
13K
FireAlarmPedia
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Iron Mountain (NW Edmonton 2)

From FireAlarmPedia
More actions
Revision as of 15:26, 6 March 2026 by TwentyThree33 (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Notifier NFS-320C<br />FACP Location: Main Entrance Vestibule<br />System Type: Single-Stage Addressable<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC<br />System Coding: Temporal<br>Strobes Synchronized: Yes, System Sensor<br />Date of last known Upgrade: 2013<br />Most Recent Known Modification: N/A<br />Year Opened: 2012 |} '''Iron Mountain''' is a North American comp...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier NFS-320C
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: 2013
Most Recent Known Modification: N/A
Year Opened: 2012

Iron Mountain is a North American company specializing in document destruction. This particular warehouse is located at 12828 184 St NW, in Edmonton, Alberta, Canada. The building was built in 2012, and the fire alarm system was installed in 2013.

System Specifications (2013-present)

FACP

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Notifier's FlashScan addressable protocol, and the system coding is temporal.

Booster Panels

There is a Notifier PSE-6C 6-amp booster power supply on the east wall.

Notification Appliances

All base building notification appliances are System Sensor "SpectrAlert Advance" P2RA horn/strobes (red, wall-mount, set to 15cd).
There is one Notifier KMS-10-24A motor bell (10" gong) mounted on a Wheelock RSSP-24MCW-FR strobe plate (red, set to 15cd), which only activates in a VESDA Action event.

Initiating Devices

Pull Stations

Most pull stations are Notifier MPS-950B conventional single-action pull stations, wired to Notifier FMM-101A addressable monitor modules.
Some areas have Notifier NBG-12LX addressable dual-action pull stations.

Automatic Detection Devices

There are Notifier FSP-851A addressable photoelectric smoke detectors in some areas with low ceilings, mounted on System Sensor B210LPA bases.
There are several VESDA aspirating smoke detection systems in this building.

Modules

There are Notifier FDM-1A addressable dual-input monitor modules supervising the generator's run/trouble contacts, the fire pump's run/trouble contacts, and the sprinkler system's tamper and flow switches.
There is a Notifier XP10-MA 10-zone interface card supervising all VESDAs.

EOLs

There are Notifier EOL-CR end of line resistor plates on all sprinkler, VESDA and signal circuits.

Retrieved from "https://firealarmpedia.org/index.php?title=Iron_Mountain_(NW_Edmonton_2)&oldid=13572"