Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Jasper Station

From FireAlarmPedia
Revision as of 16:41, 21 December 2023 by Alberta Fire Alarms (talk | contribs) (And we like these too!)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier NFS-320C
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, SS
Date of last known Upgrade: 2010s
Year Opened: 1926

Jasper Station is a heritage train station located at 607 Connaught Drive, Jasper, AB. It serves as a station on VIA Rail and Rocky Mountaineer railway lines. It was built in 1926, and the fire alarm system was upgraded in the 2000s.

System Specifications (2000s-present)

FACP

The station is protected by a Notifier NFS-320C addressable fire alarm system. The panel location is unknown. It replaced a Notifier AFP-200C in the 2010s. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.

Annunciators

There is a Notifier LCD2-80 LCD annunciator paired with an ACM-24AT LED annunciator at the entrance.

Notification Appliances

All notification appliances are System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, set to electromechanical, 15cd).

Initiating Devices

Pull Stations

The pull stations are a mix of Notifier MPS-950B conventional pull stations and NFM-950B conventional pull stations; most are NFM-950B. All pull stations are wired to Notifier FMM-101A addressable modules, located directly behind each station.

Automatic Detection Devices

None noticed. There is a sprinkler system with waterflow detection.

Modules

There are Notifier FMM-1A addressable monitor modules supervising the sprinkler system’s tamper and flow switches.