Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

5303 Magasin Ave, Beaumont

From FireAlarmPedia
Revision as of 17:45, 4 July 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier NFS-320C
FACP Location: Electrical Room
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes
Date of last known Upgrade: 2018
Year Opened: 2016

5303 Magasin Ave is the address given to a building in Bryant Heritage Plaza, Beaumont, AB. It consists of Dr. Dan Dental, Bright Eyes Daycare and OSC, Beaumont Laundromat, and several unoccupied tenants. It was built in 2016, and has the original fire alarm system.

System Specifications (2018-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in an electrical room. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

Most notification appliances are System Sensor “SpectrAlert Advance” P2RA horn/strobes (red, wall-mount, set to 15cd).

Dr. Dan Dental has a System Sensor “L-Series” P2RLA horn/strobe (red, wall-mount, set to 15cd electromechanical) at the back of the dental office, installed in 2018 as that area was redone.

For exterior notification, there is a System Sensor P2RKA weatherproof horn/strobe (red, wall-mount, set to 15cd) outside the electrical room.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Notifier NBG-12LX addressable dual-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Notifier FSP-851A addressable photoelectric smoke detectors in some areas, mounted on System Sensor B210LPA bases. There is also a sprinkler system with waterflow detection.

Modules[edit | edit source]

There are Notifier FMM-1A addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

There are Notifier ISO-XA isolator modules on each SLC.

EOLs[edit | edit source]

There are Notifier EOL-CR end-of-line resistors on all sprinkler and signal circuits.